(Dry,Heat,Fan)Mode Lights:
Upon selecting e mode, a solid green light (window) illuminates adjacent to the modet selected, Under the "Dry = and "Heat" mode (only) this light also serves to identify the operational status of the selected (compressor/heater) program. (see below)
Ory_
A "solid" green llght indicates the compressor cycled "on" and is operalJonal.
A "flashlng" green light indicates the compressor cycled "off" and is
Heat:
A"solid" green light indicates the heating element cycled "on" and is operational. A"flaahlng 'tgreen light indicates the heating element cycled "off'. Both heater and fan motor will not be operationat during this (flashing greeq, light) condition.
Fan Mode:
Since there are no controlled settings/options in this mode, ether than fan speed, (high/low) the solid green
light remains on at all times until the mode is changed and/or the unit is switched off.
Dry Level Mode Lights'
(Continuous, 5o%, 60%, 70%, 80%):
A solid green light (window) illuminates adjacent to the RH% level selected.
Fan Speed Selection:
Two fan speeds ere available in ell operating modes, "High/Low" identified by a solid green light (window) adjacent to the mode selected,
Water Full Flashing Light/Audible Alarm:
Dry Mode:
The water full light flashes continuously and an audible alarm will sound (8 beeps) to notify you when the water tank is full end/or is not propedy positioned inside the cabinet, The dehumidifier will cease (stop) ell operation automatically, during this condition, (This is e safety feature.)
Heat & Fan Mode;
The water full light and audible alarm operate in the same
basic manner described in the "DRY" mode (above). However, the significant difference being both the "Heater
&Fan" will continue to operate under a (full water tank) flashing light condition. Since no dehumiditylng occurs during these modes. However, switching beck to the "DRY _ mode will immediately atop any dehumidifying operation.
7