Sears 1700 manual Service hints, Summer Shut Down, Fall Start UP, Servicing the Float

Page 10

12.Close top metal hinged cover and replace front plastic cover.

13.Plug in transformer.

14.Turn humidistat to "test" momentarily and check for media wheel rotation. Reset humidistat according to outdoor tem- perature as instructed on label and reinstall front cover. Unit is back in operation.

SUMMER SHUT DOWN:

Unplug transformer, close saddle valve, close bypass damper. (CLEAN PER ABOVE AND LEAVE RESERVOIR EMPTY.) As a reminder, you may want to put a tag or sticker on the unit indi- cating it has been shut down for the summer and will require start up in the fall.

FALL START UP:

Plug in transformer, open saddle valve, open bypass damper and set humidistat to TEST position. Check for proper water level and media wheel operation. Set humidistat according to outdoor temperature as instructed on label.

Float

Body

Pivot Pin

*Reverse button if it has not been used.

Replace with new button if both sides are worn.

SERVICING THE FLOAT

If the humidifier has been overflowing, the float valve button may be worn. This button will wear much like a faucet washer. To service:

1.Turn off water at saddle valve.

2.Remove float from humidifier (pull out pivot pin).

3.Service float as shown in illustration at left.

4.Reinstall, turn on water at saddle valve and test float.

service hints

Frequently what seems to be a major problem can be solved very easily. Listed below are the common concerns with any humidifier.

Check the simple things first. Remove the front panel and see if there is a crusty, white lime build-up on the media pad. The lime build- up won't hurt the humidifier, but will reduce its output. Low output might just mean your humidifier needs cleaning. While you're checking for lime build-up, look to see if the media wheel is turning. If not, check the power supply.

CONDITION

WHAT TO CHECK

WHAT TO DO

Too little Humidity

1.Does humidifier need cleaning.

2.Is media wheel rotating?

3.Humidistat setting.

4.Water to unit.

5.Excessive air loss in house.

6.Is water level correct?

7.Is damper open?

1.Clean humidifier and clean or replace media pad and reservoir liner.

2.a. Clean or replace media pad.

b.Check to see if transformer is properly plugged in.

c.Inspect main fuse or circuit breaker.

d.Check to see if media motor is rotating.

e.Humidistat setting too low, turn knob clockwise to increase humidity.

3.Set for proper outdoor temperature - lowest 24 hour temperature.

4.Turn on saddle valve and check for possible obstruction in water line. Is water supply connected?

5.Close fireplace damper, seal around doors and windows.

6.Adjust float.

7.Slide damper out for winter operation.

Too much

1.

Humidistat setting.

 

Humidity

2.

Other

humidification sources.

Humidifier

1.

Is humidifier level?

 

Overflows

2.

Float

valve.

 

 

3.

Air flow too high.

 

Humidifier

1.

Mounting

or plenum.

Making Noise

2.

Water

pressure.

 

 

3.

Media

Wheel.

 

Humidifier Motor

This is a normal condition

Comes On When

1.

If heating

season

is over.

Furnace Isn't

2.

If heating

season

is just starting.

Running

 

 

 

 

 

1.Turn knob counterclockwise to decrease humidity.

2.May be a temporary condition caused by moisture from laundering, bathing, cooking, etc.

1.Level unit.

2.Service as shown in Fig. 25.

3.Adjust damper.

1.Tighten all fasteners.

2.A slight sound is normal as water enters humidifier.

3.Check clearance of media wheel in reservoir.

1.Turn knob on humidistat to minimum setting.

2.This is a normal condition since humidistat is controlling humidifier.

10

Image 10
Contents Installation Maintenance Repair Parts Troubleshooting KenmoreContents Understanding Humidity Typical Questions AskedSelecting a location DisassemblyInspection MotorBracket Fiber Plenum DuctsInstallation Water SupplyPivot Pin LKeil,B==ilrd Cold air plenum mount F g21 Install humidistat on hot air plenumHumidistat Wall mount FigMaintenance OperationFall Start UP Service hintsSummer Shut Down Servicing the FloatModel no Repair partsKenmore 1700 Central Humidifier KEY Part DescriptionKenmore 303.14601 Furnace Humidifier Maintenance For the repair or replacement parts you need Kenmore

1700 specifications

The Sears 1700 is a remarkable piece of technology that emerged during its heyday, capturing the attention of consumers with its innovative features and robust performance. Introduced in the late 20th century as part of Sears' commitment to offering quality products, the 1700 quickly established itself as a reliable option for those seeking an efficient and user-friendly appliance.

One of the most notable features of the Sears 1700 is its powerful motor, which allows for efficient operation across a range of tasks. Whether it’s tackling heavy laundry loads or managing daily chores, the motor ensures that it delivers consistent performance. Apart from its strength, the noise reduction technology implemented in the design helps maintain a quieter environment during operation, addressing a common complaint from users of similar appliances.

In terms of design, the Sears 1700 boasts a sleek, modern aesthetic that integrates well into any household. With a user-friendly interface, it features intuitive controls, making it accessible to users of all ages. This commitment to user experience is reflected in the layout, with clearly labeled buttons and dials for ease of use.

Another significant aspect of the Sears 1700 is its versatility. It offers multiple settings tailored to different fabric types, ensuring optimal care and cleaning for garments. This adaptability makes it an essential appliance for families, allowing users to wash everything from delicate fabrics to heavy-duty items without compromising on quality.

The technology behind the Sears 1700 also includes energy-efficient settings, allowing users to save on utility bills while reducing their environmental footprint. This focus on sustainability is part of a broader trend in the appliance industry toward energy conservation, appealing to eco-conscious consumers.

Durability is another hallmark of the Sears 1700. Constructed with high-quality materials, it is designed to withstand the rigors of daily use. This reliability, combined with a warranty for peace of mind, has led many consumers to consider the Sears 1700 a long-term investment for their household needs.

In summary, the Sears 1700 stands out due to its powerful motor, noise reduction technology, user-friendly design, versatility, energy efficiency, and durability. These features collectively position it as a quality choice for consumers looking to enhance their home appliance lineup. Whether for laundry or other household tasks, the Sears 1700 has proven to be a dependable and efficient solution for many families.