Selecting a location, Inspection, Disassembly

selecting a location

Consider these points as you choose the location for your hu- midifier.

Locate humidifier on supply air plenum (Fig. 1) or return air

plenum. If the humidifier is installed on the return air plenum,

the flexible hose, round opening, is connected to the supply air plenum.

If furnace is equipped with air conditioning, humidifier should be mounted above or at slope side of "A" coil to avoid possible splashing (Fig. 2) of water in reservoir.

Humidifier should be installed so that if the humidifier or any other connections should leak, the resulting flow of water will not cause damage. Under no condition is Sears and the manu- facturer to be held liable for any water damage in connection with this humidifier. Never install humidifier in attic or crawl space where freezing may occur or leaking

If holes	between		supply	air plenum and return air
be located		more	than 36 inches apart (Fig. 1),
round pipe		and fittings (not supplied)
section	of	flexible tube		No. 281152-05	)urchased
through	the Sears				for this

type installation are available at Sears.

			Supply
9	inch	minimum	Air
36	inch	maximum using flex	Plenum
	hose	provided*	(Warm to
			Touch
* Purchase additional			During
hose for greater spans.			Heating

Return Air

Plenum

Furnace

Place Humidifier

Duct

Supply

Plenum

Air Conditioner Coil

inspection

	This humidifier is a_molea
	with the bypass d_t" on the left
	side	(Fig. 3)._is		is suitable
	for install p_on as shown in
	Fig. l:._is		is suitable for your
	inst_ation, remove parts as
	_wn	under Disassembly.
	f_Sl_lp	conversion		steps A, B,
f_	and	IX Start	your	installation
	with	C and then skip to [] 1.

If you require the bypass duct on the right (Fig. 4), remove parts as shown under Disas- sembly and start with A.

AS RECEIVED (Left Hand Flange)

"-U

Bypass Duct

AS CONVERTED (Right Hand Flange)

Bypas

l l otor

disassembly

Remove front cover. Lift top cover to lock position. Pull pivot pin and remove float assembly from valve. Lift out media wheel.

Remove water reservoir.

I=l[e'l.3	Motor	Bracket Top Flange-		Pull Up--7
	-Wire Bearing Support -- Pull Up			/
	-Wire Bearing Support -- Pull Up
	,Top	Cover	_

conversion- (,frequired- see "inspection" above)

A	Pull motor bracket and wire bearing support to remove	-Lances	Wire Support
from lances (Fig. 5).

1700 specifications

The Sears 1700 is a remarkable piece of technology that emerged during its heyday, capturing the attention of consumers with its innovative features and robust performance. Introduced in the late 20th century as part of Sears' commitment to offering quality products, the 1700 quickly established itself as a reliable option for those seeking an efficient and user-friendly appliance.

One of the most notable features of the Sears 1700 is its powerful motor, which allows for efficient operation across a range of tasks. Whether it’s tackling heavy laundry loads or managing daily chores, the motor ensures that it delivers consistent performance. Apart from its strength, the noise reduction technology implemented in the design helps maintain a quieter environment during operation, addressing a common complaint from users of similar appliances.

In terms of design, the Sears 1700 boasts a sleek, modern aesthetic that integrates well into any household. With a user-friendly interface, it features intuitive controls, making it accessible to users of all ages. This commitment to user experience is reflected in the layout, with clearly labeled buttons and dials for ease of use.

Another significant aspect of the Sears 1700 is its versatility. It offers multiple settings tailored to different fabric types, ensuring optimal care and cleaning for garments. This adaptability makes it an essential appliance for families, allowing users to wash everything from delicate fabrics to heavy-duty items without compromising on quality.

The technology behind the Sears 1700 also includes energy-efficient settings, allowing users to save on utility bills while reducing their environmental footprint. This focus on sustainability is part of a broader trend in the appliance industry toward energy conservation, appealing to eco-conscious consumers.

Durability is another hallmark of the Sears 1700. Constructed with high-quality materials, it is designed to withstand the rigors of daily use. This reliability, combined with a warranty for peace of mind, has led many consumers to consider the Sears 1700 a long-term investment for their household needs.

In summary, the Sears 1700 stands out due to its powerful motor, noise reduction technology, user-friendly design, versatility, energy efficiency, and durability. These features collectively position it as a quality choice for consumers looking to enhance their home appliance lineup. Whether for laundry or other household tasks, the Sears 1700 has proven to be a dependable and efficient solution for many families.