Sears 1700 manual Humidistat, Cold air plenum mount F g21, Wall mount Fig

Page 8

humidistat

The humidistat is designed to mount on the cold air plenum of your furnace or on an interior wall of the home. The cold air ple- num, however is the preferred location for sensing the average humidity throughout your home. Select your location and follow the appropriate instructions.

NOTE: THE HUMIDISTAT AS SUPPLIED IS ASSEMBLED I FOR COLD AIR PLENUM INSTALLATION (FIG. 21).

cold air plenum mount (F g21).

1 Select a location that is a minimum of 6" upstream

on cold air plenum (Fig. 22). Peel off paper backing and posi- tion template supplied, drill (4) 1/8" diameter holes and cut out center portion along solid line. Peel off backing and apply gasket material as indicated by dashed lines.

 

 

I

CAUTION: _

install humidistat on hot air plenum.

I

 

 

I

-_ 2 Remove knob and cover from humidistat. To remove

cover, place screwdriver blade in slot at side of humidistat and twist.

Position humidistat in opening and fasten with 4 screws provided.

_ 4 Install shaft extension. Install cover by snapping onto backplate. Press knob onto shaft extension.

Connect wiring (Fig. 24). Plug 24 VAC transformer into 120 VAC outlet.

_i 6 Peel off backing and attach the operating instruc- tion label onto the cold air plenum next to the humidistat.

wall mount (Fig.

r iI Remove knob and cover from humidistat.To remove

cover, place screwdriver blade in slot at side of humidistat and twist.

2 Convert humidistat for wall mounting by removing control unit from backplate. Reassemble control unit to backplate as illustrated in (Fig. 23) with spacers to rear and shaft forward. Remove electrical disconnect by cutting the (2) wires. Strip ends 1/2" for splicing to wall wire.

INOTE: Shaft extension is not required for wall mounting.

i 3 Select a location on a convenient inside wall, usu- ally beside your furnace thermostat.

Run low voltage wire through the wall. Exit hole must be within the lower backplate opening. (Purchase additional wire as required.)

5Connect low voltage wires from wall to previously

cut leads on humidistat by stripping ends and using wire nuts (not provided). Position and fasten humidistat to wall with (4) screws provided. Install cover by snapping onto backplate.

Press knob onto humidistat shaft. Make sure 1/8" air space is maintained between wall and backplate to allow air circulation and humidity sensing.

6 Connect wiring (Fig. 24). Remove electrical discon- nect by cutting wires on harness, strip ends and splice to low voltage wire from wall humidistat using wire nuts. (Wire nuts not provided. Purchase them from your local Sears Hardware Store.) Plug 24 VAC transformer into 120 VAC outlet. Do not use existing transformer on furnace.

NOTE: Humidifier humidifies only when furnace is on, I however, Media Wheel will turn whenever humidistat I calls for humidity.

NOTE: If the installation is being made in the sum- mer or when the humidity is high, turn knob to the test position and the humidifier should start. When your system is working satisfactorily, turn knob back to the minimum humidity setting until winter.

NOTE: By turning knob to the test position humidifier should start. (Do not leave on test.)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Maintenance Repair Parts Troubleshooting KenmoreContents Understanding Humidity Typical Questions AskedInspection DisassemblySelecting a location MotorBracket Fiber Plenum DuctsInstallation Water Supply==ilrd LKeil,BPivot Pin Install humidistat on hot air plenum HumidistatCold air plenum mount F g21 Wall mount FigMaintenance OperationService hints Summer Shut DownFall Start UP Servicing the FloatRepair parts Kenmore 1700 Central HumidifierModel no KEY Part DescriptionKenmore 303.14601 Furnace Humidifier Maintenance For the repair or replacement parts you need Kenmore

1700 specifications

The Sears 1700 is a remarkable piece of technology that emerged during its heyday, capturing the attention of consumers with its innovative features and robust performance. Introduced in the late 20th century as part of Sears' commitment to offering quality products, the 1700 quickly established itself as a reliable option for those seeking an efficient and user-friendly appliance.

One of the most notable features of the Sears 1700 is its powerful motor, which allows for efficient operation across a range of tasks. Whether it’s tackling heavy laundry loads or managing daily chores, the motor ensures that it delivers consistent performance. Apart from its strength, the noise reduction technology implemented in the design helps maintain a quieter environment during operation, addressing a common complaint from users of similar appliances.

In terms of design, the Sears 1700 boasts a sleek, modern aesthetic that integrates well into any household. With a user-friendly interface, it features intuitive controls, making it accessible to users of all ages. This commitment to user experience is reflected in the layout, with clearly labeled buttons and dials for ease of use.

Another significant aspect of the Sears 1700 is its versatility. It offers multiple settings tailored to different fabric types, ensuring optimal care and cleaning for garments. This adaptability makes it an essential appliance for families, allowing users to wash everything from delicate fabrics to heavy-duty items without compromising on quality.

The technology behind the Sears 1700 also includes energy-efficient settings, allowing users to save on utility bills while reducing their environmental footprint. This focus on sustainability is part of a broader trend in the appliance industry toward energy conservation, appealing to eco-conscious consumers.

Durability is another hallmark of the Sears 1700. Constructed with high-quality materials, it is designed to withstand the rigors of daily use. This reliability, combined with a warranty for peace of mind, has led many consumers to consider the Sears 1700 a long-term investment for their household needs.

In summary, the Sears 1700 stands out due to its powerful motor, noise reduction technology, user-friendly design, versatility, energy efficiency, and durability. These features collectively position it as a quality choice for consumers looking to enhance their home appliance lineup. Whether for laundry or other household tasks, the Sears 1700 has proven to be a dependable and efficient solution for many families.
Top Page Image Contents