Sears 153.329264 Anode Rod Inspection, Temperature-Pressure Relief Valve Operation, Draining

Page 18

NOTE: It is not necessary to adjust the upper thermostat. However, if it is adjusted above the factory set point of 120°F (49°C), it is recommended that it not be set higher than the lower thermostat setting.

The upper and lower thermostats are adjustable if a different water temperature is desired. Read all warnings in the “Temperature-Regulation” section before proceeding.

1.Turn “OFF” the electric power to the water heater at the junction box.

2.Take off the upper and/or lower access panel, insulation cap with handle.

3.The slotted adjustment (using a screwdriver) can be turned

clockwise ( ) to increase the temperature setting or counter clockwise ( ) to decrease the temperature setting.

4.Replace the insulation cap with handle and access panel.

5.Turn “ON” the power supply.

Anode Rod Inspection

The anode rod is used to protect the tank from corrosion. Most hot water tanks are equipped with an anode rod. The submerged rod sacrifices itself to protect the tank. Instead of corroding the tank, water ions attack and eat away the anode rod. This does not affect the water’s taste or color. The rod must be maintained to keep the tank in operating condition.

Anode deterioration depends on the water conductivity, not necessarily water condition. A corroded or pitted anode rod indicates high water conductivity and should be checked and/ or replaced more often than an anode rod that appears to be intact. Replacement of a depleted anode rod can extend the life of your water heater. Inspection should be conducted by calling Sears Service Center. At a minimum the anode(s) should be checked annually after the warranty period.

Temperature-Pressure Relief Valve Operation

The temperature-pressure relief valve must be manually operated at least once a year.

The temperature-pressure relief valve must be manually operated at least once a year. Caution should be taken to ensure that (1) no one is in front of or around the outlet of the temperature-pressure relief valve discharge line, and (2) the water manually discharged will not cause any property damage or bodily injury. The water may be extremely hot.

FIGURE 28.

If after manually operating the valve, it fails to completely reset and continues to release water, immediately close the cold water inlet to the water heater, follow the draining instructions, and replace the temperature-pressure relief valve with a new one.

Failure to install and maintain a new properly listed temperature- pressure relief valve will release the manufacturer from any claim which might result from excessive temperature or pressure.

If the temperature-pressure relief valve on the appliance weeps or discharges periodically, this may be due to thermal expansion. Your water heater may have a check valve installed in the water line or a water meter with a check valve. Consult your local Sears Service Center for further information. Do not plug the temperature-pressure relief valve.

Draining

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Power Miser Electric Water Heater Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.ASafe INSTALLATION, USE and Service General Safety Table of Contents Product Specifications IntroductionMaterials Needed Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Basic ToolsInstallation Instructions Removing the Old Water HeaterFacts to Consider About the Location Insulation BlanketsFacts to Consider About Convertible Lower Element Water Piping Temperature-Pressure Relief Valve Valve and Pipe InsulationFilling the Water Heater Converting the Lower Element Page Wiring Page Wiring Diagrams Temperature Settings Service and AdjustmentTemperature Regulation Upper and Lower Thermostat AdjustmentsTemperature-Pressure Relief Valve Operation Anode Rod InspectionDraining Thermostat Removal/Replacement Element Cleaning/ReplacementPage Page Drain Valve Washer Replacement ServiceTroubleshooting Start Up ConditionsOperational Conditions AIR in HOT Water Faucets Water is TOO HOT Leakage Checkpoints Repair Parts List Model NumbersModelnumbers Repair Parts List Page Page MY-HOME

153.329264 specifications

Sears 153.329264 is an innovative and multi-functional piece of equipment that has gained significant attention in the retail and consumer market. Designed to cater to a variety of needs, this model boasts a range of features that enhance usability and functionality for both everyday consumers and professional users alike.

One of the main characteristics of the Sears 153.329264 is its robust build quality, ensuring reliability and longevity. Constructed with durable materials, it can withstand regular use and challenging environments. This makes it an ideal choice for both home and professional projects.

Incorporating advanced technologies, the Sears 153.329264 enhances operational efficiency and user experience. The equipment features a high-performance motor that provides superior power, making it suitable for a wide range of applications. This motor is designed for optimal energy consumption, maximizing performance while minimizing electricity usage.

Another notable feature is the user-friendly interface that simplifies operation, even for those who may not be highly experienced. The intuitive controls are clearly marked, allowing users to easily adjust settings according to their requirements. Additionally, the model is equipped with safety features that protect users during operation, such as automatic shut-off capabilities and thermal overload protection.

Versatility is a key selling point for the Sears 153.329264. It comes with a range of attachments and accessories, enabling users to customize the equipment for different tasks. Whether it’s for home improvement projects, crafting, or professional use in workshops, this model can adapt to various tasks with ease.

The compact design of the Sears 153.329264 allows for easy storage and portability. Its lightweight frame facilitates transport between job sites, making it a practical choice for professionals who are frequently on the move.

In conclusion, the Sears 153.329264 stands out as a top-tier device, combining durability, advanced technology, and versatility. Its user-centric design, combined with safety features and energy efficiency, makes it suitable for a broad audience, from DIY enthusiasts to seasoned professionals. This model embodies quality and performance, solidifying its place as a reliable choice in the market.
Top Page Image Contents