Sears 153.329264 owner manual Leakage Checkpoints

Page 26

LEAKAGE CHECKPOINTS

Read this manual first. Then before checking the water heater make sure the electric supply has been turned “OFF”, and never turn the electric supply “on” before the tank is completely full of water.

Use this guide to check a “Leaking” water heater. Many suspected “Leakers” are not leaking tanks. Often the source of the water can be found and corrected.

If you are not thoroughly familiar with electric codes, the water heater, and safety practices, contact your local Sears Service Center to check the water heater.

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating element, the tank must be filled with water. The water must flow from the hot water faucet before turning “ON” power.

A.*Condensation may be seen on pipes in humid weather or pipe connections may be leaking.

B.Small amounts of water from the temperature-pressure relief valve may be due to thermal expansion or high water pressure in your area.

C.*The temperature-pressure relief valve may be leaking at the tank fitting.

D.The element may be leaking at the tank fitting.

Turn electrical power “OFF”, remove access panel and insulation cap with handle. If leaking around element, follow proper draining instructions and remove element. Reposition or replace gasket on element. Place element into opening and tighten securely. Then follow “Filling the Water Heater” instructions in the “Installation Instructions” section.

E.Water from drain valve may be due to the valve being opened slightly

F.*The drain valve may be leaking at the tank fitting.

G.Water in the water heater bottom or on the floor may be from condensation, loose connections or the temperature- pressure relief valve. DO NOT replace the water heater until a full inspection of all possible water sources is made and necessary corrective steps taken.

Leakage from other appliances, water lines, or ground seepage should also be checked.

Note: To check where threaded portion enters tank, insert cotton swab between jacket opening and fitting. If cotton is wet, follow “Draining” instructions in the “Service and Adjustment” section and then remove fitting. Put pipe dope or teflon tape on the threads and replace. Then follow “Filling the Water Heater” instructions in the “Installation Instructions” section.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Power Miser Electric Water Heater Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.ASafe INSTALLATION, USE and Service General Safety Table of Contents Product Specifications IntroductionMaterials Needed Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Basic ToolsInstallation Instructions Removing the Old Water HeaterFacts to Consider About Convertible Lower Element Facts to Consider About the LocationInsulation Blankets Water Piping Temperature-Pressure Relief Valve Valve and Pipe InsulationFilling the Water Heater Converting the Lower Element Page Wiring Page Wiring Diagrams Temperature Settings Service and AdjustmentTemperature Regulation Upper and Lower Thermostat AdjustmentsDraining Temperature-Pressure Relief Valve OperationAnode Rod Inspection Thermostat Removal/Replacement Element Cleaning/ReplacementPage Page Drain Valve Washer Replacement ServiceOperational Conditions TroubleshootingStart Up Conditions AIR in HOT Water Faucets Water is TOO HOT Leakage Checkpoints Repair Parts List Model NumbersModelnumbers Repair Parts List Page Page MY-HOME

153.329264 specifications

Sears 153.329264 is an innovative and multi-functional piece of equipment that has gained significant attention in the retail and consumer market. Designed to cater to a variety of needs, this model boasts a range of features that enhance usability and functionality for both everyday consumers and professional users alike.

One of the main characteristics of the Sears 153.329264 is its robust build quality, ensuring reliability and longevity. Constructed with durable materials, it can withstand regular use and challenging environments. This makes it an ideal choice for both home and professional projects.

Incorporating advanced technologies, the Sears 153.329264 enhances operational efficiency and user experience. The equipment features a high-performance motor that provides superior power, making it suitable for a wide range of applications. This motor is designed for optimal energy consumption, maximizing performance while minimizing electricity usage.

Another notable feature is the user-friendly interface that simplifies operation, even for those who may not be highly experienced. The intuitive controls are clearly marked, allowing users to easily adjust settings according to their requirements. Additionally, the model is equipped with safety features that protect users during operation, such as automatic shut-off capabilities and thermal overload protection.

Versatility is a key selling point for the Sears 153.329264. It comes with a range of attachments and accessories, enabling users to customize the equipment for different tasks. Whether it’s for home improvement projects, crafting, or professional use in workshops, this model can adapt to various tasks with ease.

The compact design of the Sears 153.329264 allows for easy storage and portability. Its lightweight frame facilitates transport between job sites, making it a practical choice for professionals who are frequently on the move.

In conclusion, the Sears 153.329264 stands out as a top-tier device, combining durability, advanced technology, and versatility. Its user-centric design, combined with safety features and energy efficiency, makes it suitable for a broad audience, from DIY enthusiasts to seasoned professionals. This model embodies quality and performance, solidifying its place as a reliable choice in the market.
Top Page Image Contents