Sears 153.329264 owner manual Thermostat Removal/Replacement, Element Cleaning/Replacement

Page 19

The water heater should be drained if being shut down during freezing temperatures. Also, periodic draining and cleaning of sediment from the tank may be necessary.

1.Before beginning turn “OFF” the electric power supply to the water heater.

2.CLOSE the cold water inlet valve to the water heater.

3.OPEN a nearby hot water faucet and leave open to allow for draining.

4.Connect a hose to the drain valve and terminate to an adequate drain or outdoors.

5.OPEN the water heater drain valve to allow for tank draining.

NOTE: If the water heater is going to be shut down and drained for an extended period, the drain valve should be left open with hose connected allowing water to terminate to an adequate drain.

6.Close the drain valve.

7.Follow “Filling the Water Heater” instructions in the “Installation Instructions” section.

8.Turn “ON” power to the water heater.

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating element, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” power.

Thermostat Removal/Replacement

1.Turn “OFF” the electrical power to the water heater at the junction box.

2.Remove the access panel and the insulation cap with handle.

3.Lift out the tab as shown below to unclip the terminal cover from the thermostat. The terminal cover can now be removed from the thermostat.

FIGURE 29.

4.Disconnect wires from the thermostat.

5.Remove the thermostat from behind the thermostat bracket.

6.Place the new thermostat in the bracket making sure it fits firmly against the tank.

7.Attach the wires to the new thermostat.

NOTE: Some of the terminals may require straight-in wiring through an eye-opening. If wires are now looped, recut and strip wire 3/8” to a straight length and insert.

8.Put plastic terminal cover back in place.

9.Replace the insulation cap with handle to cover the thermostat.

10.Replace access panel, then turn the electric power on.

Element Cleaning/Replacement

NOTE: These instructions are written for element cleaning and element replacement for the lower element. If it is necessary to clean or replace the upper element, then repeat these instructions.

To remove the element from your tank in order to clean or replace it.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A Power Miser Electric Water HeaterSafe INSTALLATION, USE and Service General Safety Table of Contents Introduction Product SpecificationsBasic Tools Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Materials NeededRemoving the Old Water Heater Installation InstructionsInsulation Blankets Facts to Consider About the LocationFacts to Consider About Convertible Lower Element Water Piping Valve and Pipe Insulation Temperature-Pressure Relief ValveFilling the Water Heater Converting the Lower Element Page Wiring Page Wiring Diagrams Upper and Lower Thermostat Adjustments Service and AdjustmentTemperature Regulation Temperature SettingsAnode Rod Inspection Temperature-Pressure Relief Valve OperationDraining Element Cleaning/Replacement Thermostat Removal/ReplacementPage Page Service Drain Valve Washer ReplacementStart Up Conditions TroubleshootingOperational Conditions AIR in HOT Water Faucets Water is TOO HOT Leakage Checkpoints Model Numbers Repair Parts ListModelnumbers Repair Parts List Page Page MY-HOME

153.329264 specifications

Sears 153.329264 is an innovative and multi-functional piece of equipment that has gained significant attention in the retail and consumer market. Designed to cater to a variety of needs, this model boasts a range of features that enhance usability and functionality for both everyday consumers and professional users alike.

One of the main characteristics of the Sears 153.329264 is its robust build quality, ensuring reliability and longevity. Constructed with durable materials, it can withstand regular use and challenging environments. This makes it an ideal choice for both home and professional projects.

Incorporating advanced technologies, the Sears 153.329264 enhances operational efficiency and user experience. The equipment features a high-performance motor that provides superior power, making it suitable for a wide range of applications. This motor is designed for optimal energy consumption, maximizing performance while minimizing electricity usage.

Another notable feature is the user-friendly interface that simplifies operation, even for those who may not be highly experienced. The intuitive controls are clearly marked, allowing users to easily adjust settings according to their requirements. Additionally, the model is equipped with safety features that protect users during operation, such as automatic shut-off capabilities and thermal overload protection.

Versatility is a key selling point for the Sears 153.329264. It comes with a range of attachments and accessories, enabling users to customize the equipment for different tasks. Whether it’s for home improvement projects, crafting, or professional use in workshops, this model can adapt to various tasks with ease.

The compact design of the Sears 153.329264 allows for easy storage and portability. Its lightweight frame facilitates transport between job sites, making it a practical choice for professionals who are frequently on the move.

In conclusion, the Sears 153.329264 stands out as a top-tier device, combining durability, advanced technology, and versatility. Its user-centric design, combined with safety features and energy efficiency, makes it suitable for a broad audience, from DIY enthusiasts to seasoned professionals. This model embodies quality and performance, solidifying its place as a reliable choice in the market.
Top Page Image Contents