Lux Products P621U operating instructions

Page 26

TEMPERATURE CALIBRATION: The internal temperature sensor in this thermostat is accurately calibrated at the factory, and in most cases alterations to this setting should not be needed. The Temperature Calibration feature allows you to manually offset the measured temperature by as much as plus or minus 5°F (3°C) degrees from its original value. This feature can be useful to match or synchronize this thermostat to another one or more, if multiple thermostats are used in the same home.

NOTE: The Temperature Calibration setting need to be performed in a timely manner, as the thermostat will timeout and automatically exit the adjustment screen after approximately 10 seconds without a button press.

TO CHANGE THE TEMPERATURE CALIBRATION: Ensure that the System Mode switch is in the OFF position and the Set Slide switch is in the RUN position. Press and hold both the UP and DOWN buttons together for at least 5 seconds. The words “SET” and “CAL” will appear on the screen, along with a single flashing temperature digit. Use the UP/DOWN buttons to change the number of degrees of adjustment. 0° degrees is the default value, and means no correction is being applied. Press the NEXT button to accept the setting.

SETBACK FEATURE: The setback feature is similar to both a Temperature Override and a Temperature Hold, in that both are used to maintain a fixed set temperature instead of following a programmed daily routine. A Setback can be considered the same as a Temperature Override, which can last for a longer duration that you can adjust from 1-12 hours, or 1-30 days. By default, when a Setback is activated in Heat mode, the set temperature used will be 5F (3C) degrees lower than the current set temp. For Cool mode, the set temperature used will be 5F (3C) degrees higher than the current set temp.

TO START A SETBACK: Ensure that the System Mode switch is in either the Heat or Cool position, and that the Set Slider is in the RUN position. Press and hold the SETBACK button for at least 2 seconds. The screen will change and show the words “HOURS LEFT” and “OVERRIDE”, along with two digits. Use the UP/DOWN buttons to set the duration for how long you would like to maintain a fixed set temperature (from 1 to 12 hours). If you would like to set the duration for longer than 12 hours, keep pressing the UP button. The display will change from “HOURS LEFT” to “DAYS LEFT”, with an available duration of 1 to 30 days. Once your desired Setback duration is shown on the screen, you can either wait for the screen to advance forward on its own, or press the NEXT button (behind the door) one time to jump ahead rapidly. Now use the UP/DOWN buttons to select your

26

Image 26
Contents 2 1 U Page P621U System CompatibilityFeatures Tools YOU MAY NeedMounting Location Remove OLD ThermostatInstall Thermostat Base Wiring InformationWiring Diagram Notes Wiring Diagrams With AUX / Emergency HeatIncluding Millivolt 2-WIRE Heat USE RH & W1 HOT Water Heating only STAGE, Cooling only Stage Heating and 1-STAGE Cooling Stage Stage Cooling with TWO Separate 24V Transformers SINGLE-STAGE Heat Pump System Heat / 1-COOL, Heat Pump System Hardware Setup Options Page Complete the Install Front Panel ItemsPage Heat Mode Cool Mode Operating InstructionsPage Temperature Programs Advanced Features 70˚F Set Temperature Swing Setting= Page Page Page Page Software Reset The Software Reset button labeled SW Battery Replacement Technical AssistanceLimited Warranty Mercury Warning and Recycling Notice536 P

P621U specifications

The Lux Products P621U is a highly popular digital programmable thermostat that has garnered attention for its user-friendly interface and advanced features, making it a prime choice for homeowners looking to optimize their heating and cooling systems. With a sleek design and an array of functionalities, the P621U not only enhances energy efficiency but also ensures comfort in the home.

One of the main features of the P621U is its 7-day programmable schedule. This allows users to customize their heating and cooling settings for each day of the week, making it easy to align the thermostat's operation with their lifestyle. The ability to set different temperatures for weekday and weekend usage helps to minimize energy consumption when the house is unoccupied, ultimately leading to cost savings on utility bills.

The P621U employs 2H/2C heat pump technology, which facilitates the management of both heating and cooling systems efficiently. This dual-stage capability ensures that the thermostat can adapt to varying temperature demands, delivering optimal comfort year-round. Additionally, the thermostat is compatible with a wide range of HVAC systems, including conventional heating and cooling, heat pumps, and even gas or electric systems.

Another standout characteristic of the Lux Products P621U is its intuitive touchscreen display. The large, backlit screen is easy to read and navigate, allowing users to quickly adjust settings or check the current temperature. The user-friendly interface promotes a hassle-free experience, and the straightforward programming process means users can set it up with minimal effort.

The thermostat also features an auto changeover function that automatically switches between heating and cooling modes based on the temperature settings. This adaptive technology ensures that users experience consistent comfort without the need for manual adjustments. Moreover, the P621U includes a battery backup system, which preserves settings during power outages, ensuring uninterrupted operation.

The Lux Products P621U also comes equipped with an energy-saving mode, which encourages users to adopt energy-efficient practices. By allowing users to set eco-friendly temperatures, the thermostat not only helps maintain a comfortable environment but also promotes sustainability.

In summary, the Lux Products P621U is a sophisticated yet simple solution for modern heating and cooling management. With its programmable capabilities, dual-stage technology, intuitive interface, and energy-saving features, it provides a balance of comfort, convenience, and efficiency that can significantly enhance any home environment.