Trane XT302C manual Minimum number of minutes

XT302C DELUXE PROGRAMMABLE HEAT-COOL THERMOSTAT

Table 3. Installer Setup Options for the XT302C (continued).

	Press Time		Press Increase ▲ or Decrease ▼ to change setting
	▲ or ▼
	Installer	Factory Setting				Other Choices	Actual
Select	Setup Number	Display		Description	Display	Description	Setting
Adaptive	13	0		Adaptive Intelligent	1	Conventional recovery
Intelligent				Recovery (a		(system starts recovery at
Recovery™				Honeywell trademark)		programmed time)
control				control is activated
				(system starts early so
				setpoint is reached by
				start of program
				period)
Degree	14	0		Temperature displays	1	Temperature displays in °C
temperature				in °F
display
Clock format	16	0		12-hour clock format	1	24-hour clock format
Extended fan	19	0		No extended fan	1, 2 or 3	1—Fan operation extends
operation in				operation after the call		30 seconds after the call
heatinga				for heat ends		ends.
						2—Fan operation extends
						60 seconds after the call
						ends.
						3 —Fan operation extends
						90 seconds after the call
						ends.
Extended fan	20	0		No extended fan	1, 2 or 3	1—Fan operation extends
operation in				operation after the		30 seconds after the call
cooling				call for cool ends		ends.
						2—Fan operation extends
						60 seconds after the call
						ends.
						3 —Fan operation extends
						90 seconds after the call
						ends.
Outdoor	24	0		No outdoor	1	Outdoor temperature
temperature				temperature displays		displays. Requires a
display (select						TAYSENS100A Outdoor
models)						Sensor.
Comfort-R	28	0		No fan delay	1 or 2	1—30 seconds
Enable						2—15 seconds
Minimum	30	4		Heating and cooling	3 thru 10	Heating and cooling
Deadband				setpoints can be set		setpoints can be set no
Between				no closer than 4°F		closer than the chosen
Heating and				(2°C)		value:
Cooling in Auto						3—3 °F (1.5°C)
Changeover						4—4 °F (2°C)
Mode						5—5 °F (2.5°C)
						6—6 °F (3°C)
						7—7 °F (3.5°C)
						8—8 °F (4°C)
						9—9 °F (4.5°C)
						10—10 °F (5°C)
Minimum On	32	5		5-minute minimum on	0 thru 15	Minimum number of minutes
Time (Heat)				time for compressor		(0 thru 15) the compressor
						will be on during call for
						heat
							(continued)

Pub. No. 18-HD25D7-5

69-1213—1 (T8624) 6