Operation | Aube Technologies CT230-120GA instruction

together as per FIGURE 1.

box) to the base.

Installation Instructions

MASTER THERMOSTATS	SLAVE UNITS
TH113-A/F/AF (12VDC)	CT230-120GA
TH114-A/F/AF (12VDC)	CT230-120GB
TH115-A/F/AF (12VDC)	CT230-240GA
TH116-A/F/AF (12VDC)	CT230-240GB

1. Introduction

This master and slave unit system is specially designed for large floor heating applications exceeding 15 A.

The master thermostat controls a single or multiple floor heating zones driven by slave units. The master thermostat can control up to 10 slave units.

Each slave unit drives its own zone and is equipped with a GFCI test button and warning light as well as an On/Standby switch to facilitate maintenance on specific zones of the floor installation.

2. Operation

Master Thermostat

The master unit controls the temperature and sends a signal to slave units when heating is required. The floor sensor is connected to the master unit. The master unit is powered by the slave units.

Slave Unit

The slave unit receives the signal sent by the master unit and activates its load.

NOTE: There must be a minimum of one slave unit ON to power the master unit.

3. Installation

Turn off power to the heating system at the main power panel to avoid electrical shock. Installation should be carried out by an electrician.

3.1 Wiring Guidelines

•The wire distance between the master thermo- stat and slave unit should not exceed 500 ft. (150 m).

•The floor sensor cable should not exceed 200 ft. (60 m).

•A 3-wire 20 AWG cable is recommended.

3.2 Slave Units - Installation and Wiring

The slave units can operate on different voltages (e.g. 5 units @ 120 V and 5 @ 240 V).

•Required parts: CT230-120GA, -120GB, -240GA or -240GB

•Installation: On an electrical box

• Location: Installation near the master thermostat is not required (i.e. can be installed in a utility room).

• Wiring: The power bases are joined through a daisy chain connection.

n Connect the 120 V or 240 V power base wires to the power (line) and to the load (floor) using solderless con- nectors for copper wires, and secure the base to the electrical box.

o Affix the wiring sticker (in the CT230 p Connect the slave power bases

q Once installation and wiring is com- plete, mount the CT230 interface:

a) Align the bracket tabs of the CT230 with the holes located on top of the power base.

b)Secure the CT230 interface using the screw (captive).

rSwitch all slave power bases to STANDBY by sliding the protective door upwards and positioning the switch to STANDBY.

Install and connect the master unit (see 3.3).

FIGURE 1

Connections

400-230-000-D 2/7/07 1/2

CT230-240GB, CT230-120GA, CT230-240GA, CT230-120GB specifications

Aube Technologies has established itself as a prominent player in the storage solutions market with its CT230 series, which includes models like CT230-120GA, CT230-240GB, CT230-240GA, and CT230-120GB. These models are designed for both consumer and business applications, offering reliable performance and ample storage capacity to accommodate various needs.

One of the standout features of the CT230 series is the utilization of advanced flash memory technology. This not only ensures faster data access speeds but also enhances overall system responsiveness. Whether you're running demanding applications, multitasking, or just need a boost for your gaming experience, these SSDs deliver impressive speeds that significantly reduce load times.

The CT230-120GA and CT230-120GB models come equipped with 120GB of storage, making them ideal for users who require a balance between performance and capacity without needing extravagant storage space. These models are particularly suited for light users, casual gamers, and those looking to upgrade their laptops or desktops to a solid-state drive for faster boot times and improved application performance.

In contrast, the CT230-240GB and CT230-240GA models offer 240GB of storage, providing extra space for users who store larger files, such as high-definition videos, extensive photo galleries, or a myriad of applications. This additional capacity caters well to both professional users and avid gamers who require a more substantial storage solution without the burden of mechanical hard drives.

Another characteristic that sets the CT230 series apart is its excellent durability and energy efficiency. Built with advanced thermal management technologies, these SSDs operate cooler and quieter than traditional hard drives, resulting in a more pleasant user experience. Moreover, the lower power consumption not only enhances laptop battery life but also contributes to reducing energy costs in business environments.

In terms of compatibility, the CT230 series is designed to fit various systems, with support for SATA III interfaces. The versatility of these drives allows for seamless installation in desktops, laptops, and even some gaming consoles. Coupled with a robust firmware designed to optimize data integrity and security, users can have peace of mind knowing their data is safe and reliable.

In summary, Aube Technologies' CT230 series – with models CT230-120GA, CT230-240GB, CT230-240GA, and CT230-120GB – represents a comprehensive storage solution that prioritizes speed, efficiency, and reliability. With their varied capacities, advanced technologies, and durability, these SSDs meet diverse user needs, making them an excellent investment for anyone looking to enhance their computing experience.