Niles Audio HDCTR, HDLRS manual Operation, Speaker Phase, Listening at Higher Volumes, Cleaning

Page 11

Installation of the Speaker and Grille for New or Existing Construction

corner, go around the speaker, pushing the grille in a little bit each time. You should be gentle, the aluminum grille can be easi- ly bent out of shape. The speaker will have an absolutely flush appearance when it is fully in place.

Speaker Phase

Speaker wire has two conductors. One conductor is attached to the negative (-) terminals and one conductor is attached to the positive (+) terminals of both your speaker and your amplifier. Usually, the wire is marked for your convenience. There are different ways wires are marked: a stripe on one wire, a ribbed area of one conductor you can only feel, different col- ors of metal wire on each conductor, or there might be a fabric strand or string wound into one of the conductors. Of course, there are some wires which appear completely identical. Be careful, or you might make a mistake.

If you make a mistake, one speaker will be playing “out-of-phase” with the other speaker. An out-of-phase pair of speakers work against each other and the sound of the two speakers playing together will be lacking in bass and be “phasey” sounding. If you suspect the sound is not right and you cannot see any markings on the wire, try this simple test:

1.Stand half way between the two speakers.

2.Play some music with the amplifier or radio set to Mono.

3.Listen to the richness of the bass and the loudness of the sound.

4.Turn off the amplifier and reverse the connections on one amplifier channel only.

5.Repeat the listening test with the same setting of the volume control. When the sound has a richer bass and is slightly louder the speakers are working together or “in-phase”.

Operation

Listening at Higher Volumes

It requires more power to achieve a rea- sonable volume of sound in a large room than it does in a small room. It is possi- ble (even if you are not a teenager) to turn the volume so high that the amplifi- er runs out of power. This creates “clip- ping” distortion.

Clipping distortion makes treble sound very harsh and unmusical. When you hear harsh sounding treble from any good speaker, turn the volume down immedi- ately! Those harsh sounds are masking some much more powerful ultra-high-fre- quency sound spikes which will quickly damage any fine loudspeaker. You are much less likely to damage a speaker with a large amplifier because it will be very loud indeed before it produces any clip- ping distortion.

Cleaning

You can clean the speaker with a damp- ened soft cloth or paper towel. If the speaker is mounted high up on a wall or ceiling, use a broom to gently brush it off.

Operation

19

 

20

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hdctrr Hdlrss Introduction Features and BenefitsInstallation Considerations Installation ConsiderationsInsulating the Wall Cavity Speaker PlacementIncorporating a Remote Control Placement of the Front Left and Right Speakers HdlrsBoundary Effect Placement of the Center Channel Speaker HdctrPlacement of the Rear Channel Speakers Hdlrs Running the Speaker Wire in New Construction Installation FundamentalsLocation Concealing Speaker Wire Existing WallsStage Two Before Paint InstallationConstruction Stage One Before Drywall is HungInstallation Brackets, Frames Grilles Existing Walls Defeating Dsfg Installing the SpeakerMain/Surround Configuration Speaker Orientation for Directed Sound Field GeometryOperation Speaker PhaseListening at Higher Volumes CleaningLimited SpecificationsLimited Warranty Warranty

HDCTR, HDLRS specifications

Niles Audio has a longstanding reputation in the realm of home audio solutions, and its HDCTR and HDLRS models are exemplary representations of the brand's commitment to high-performance audio technology. These models cater to enthusiasts looking for comprehensive audio experiences with cutting-edge features and advanced engineering.

The Niles HDCTR, a center channel speaker, is designed to provide clarity and depth for dialogue and soundtracks in home theater setups. One of its main features is the use of advanced, high-efficiency drivers that reproduce a wide frequency range, ensuring that every nuance in sound is captured. The speaker is engineered with a high-performance 6.5-inch woofer coupled with dual 1-inch soft dome tweeters, allowing it to deliver an impressive audio performance whether you’re watching movies or listening to music.

On the other hand, the HDLRS model stands out as a pair of surround speakers that enhance the immersive experience whether in a stereo or surround sound configuration. Each speaker utilizes a 6.5-inch woofer and dual 1-inch tweeters for a balanced sound stage. The design of the HDLRS also allows for flexible placement options, making it easy to integrate into diverse home environments.

Both models feature Niles' proprietary technologies that minimize distortion and improve dynamic range, enhancing overall listening pleasure. The HDCTR is equipped for wall-mounting, allowing for seamless integration into your home theater system. Meanwhile, the HDLRS includes adjustable mounting brackets which enable precise angling to optimize sound directionality.

In terms of build quality, both speakers boast a robust design with attractive aesthetics that can complement any room decor. The cabinets are crafted from durable materials that not only withstand the test of time but also help to reduce unwanted resonance, thereby improving audio fidelity.

Furthermore, the low impedance design of the HDCTR and HDLRS models ensures compatibility with a wide range of AV receivers, making them accessible for both professional installers and casual users alike. This level of flexibility makes them excellent choices for those looking to elevate their audio experience, whether for casual listening or serious home theater setups.

Overall, Niles Audio's HDCTR and HDLRS speakers embody a perfect blend of style, performance, and technological innovation, catering to audiophiles who seek unmatched sound quality and versatile solutions for their audio needs.
Top Page Image Contents