General Description, Add Tags | Gianni Industries 982-10 instruction

981-10 and 982-10 Easiprox Split (separate controller and reader)Stand-Alone Proximity Access Control System

GENERAL DESCRIPTION

The “Easiprox Split” system is a low cost stand-alone programmable access control system based on the EM400x proximity tags and cards. The system consists of two units: a controller (981-10) and a separate read head (982-10). The memory and relay circuitry are located on the controller board which can be installed in a secure location up to 50m away. The read head is rated IP67 and can be installed in an outdoors location. The system can store the codes of 2000 unique tags. Adding and deleting tags is done by simple use of a Master Tag. The optional Tag Simulator / Programming Unit allows the programming (adding & deleting) of lost tags. The Relay can operate in Pulse or Toggle mode.

Normal Operation (Run State)

The Easiprox has two states, Programming and Run. The Run state is the normal operating state of the Easiprox. The LEDs behave as follows depending on the Relay mode - Pulse or Toggle. The Programming state is explained in the next section.

Run State - Pulse Mode

In this state, the YELLOW lamp is always on and the GREEN/RED lamp is off. Whenever a valid tag is read, the GREEN lamp will go on and the relay will operate, for the pre-set Relay Pulse time. If a card is not recognized the RED lamp will go on for 1.5 seconds.

Run State - Toggle Mode

On power-up, the YELLOW and RED lamps will be on and the relay will be off. Whenever a valid tag is read the GREEN/RED lamp will change state. When the lamp is GREEN, the relay is energized (the NO contact will be closed). When the lamp is RED, the relay is not energized (the NO contact will be open).

Programming

The Master Tag is the first tag presented to the Easiprox when it is in the Add Master state. All programming is done by using this Master Tag. To select a program function: Make successive reads of the Master Tag (each read must be no more than 2 seconds apart). Each read of the Master Tag sets the Easiprox to a new programming function. Once the required function has been reached, wait for the lamp(s) to start flashing, (approximately 3 seconds), indicating that the Easiprox is now in the selected function.

Add Master Tag

If the GREEN and YELLOW lamps are flashing, it indicates that the memory is empty and that there is no Master Tag. In this state the first tag read will be stored as the Master Tag.

Add Tags

To select this function:

Read the Master Tag once. → Only the GREEN lamp will light. → Wait for the GREEN lamp to start flashing.

The Easiprox is now in the ADD state.

In this state every tag that is presented to the reader will be stored in the system memory. (Tags can now also be added by using the optional Tag Simulator.) If a large number of tags have to be added, the ADD-ON-THE-RUN method can be used by leaving the Easiprox in the Add Tags state. In this state every tag presented to the Easiprox will operate the relay and be

Copyright All Rights Reserved.
P-MU-982-10 Ver. A Publish:2004.05.01	Page: 1/ 4

982-10, P-MU-982-10, 981-10 specifications

Gianni Industries has made a significant mark in the manufacturing sector with its range of innovative products, notably the P-MU-982-10, 982-10, and 981-10. These models are indicative of the company's commitment to quality, functionality, and advanced technology.

The P-MU-982-10 is a multifaceted unit designed for versatility in various applications. One of its standout features is its robust build quality, ensuring longevity and reliability across different environments. It is equipped with state-of-the-art sensors that enhance its operational capabilities, enabling users to monitor and manage their tasks efficiently. The model also supports seamless connectivity options, allowing integration with modern automation systems, thus making it an ideal choice for smart manufacturing processes.

Next in line is the 982-10 model, which emphasizes user-friendliness and performance. This unit boasts an intuitive interface that makes it accessible even for those with minimal technical expertise. With an emphasis on ergonomics, the design focuses on minimizing operator fatigue while boosting productivity. Its advanced processing technology enables real-time analytics, providing insights that can lead to improved decision-making and resource management.

The 981-10 model is structured for high efficiency and adaptability. It features cutting-edge energy-saving technologies that reduce operational costs significantly. In addition, components are designed for easy modular upgrades, allowing businesses to adapt to changing needs without investing in entirely new systems. Sustainability is also a focus, with materials sourced responsibly and processes that minimize environmental impact.

Across all three models, Gianni Industries integrates advanced safety protocols to protect operators and equipment alike. The inclusion of fail-safes and regular system checks ensures that these units continue to perform optimally under various conditions.

In conclusion, the P-MU-982-10, 982-10, and 981-10 from Gianni Industries are excellent representations of modern engineering, blending innovative technology with practical design. Their features significantly contribute to enhancing production efficiency, safety, and sustainability in the manufacturing sector, making them valuable assets for any industrial operation. Investing in these models not only streamlines processes but also aligns with future-oriented manufacturing goals.