Panasonic KX-TG7841 Link to cell settings, Selecting which unit receives cellular calls

Link to Cell

Link to cell settings

Selecting which unit receives cellular calls

You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring.

Handset

1For CELL 1: MMENUN#6271

For CELL 2: MMENUN#6272

2MbN: Select the desired handset or “All”. a MSAVEN

3MOFFN

Note:

RWhen you select a specific handset to receive calls for a cellular line:

–other handsets cannot answer the calls.

–the base unit can answer the calls even though it does not ring. However, you can make the base unit ring by adjusting the base unit ringer volume (page 38).

RWhen you change the setting to “All”, the base unit ringer volume also returns to the lowest level even if the ringer volume has been changed.

RThe units selected with this setting have the text message alert feature (page 53) applied to them. (KX-TG7871 series: page 3)

Ring as cell mode

Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone.

The following settings are available:

–“Off”: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 40).

–“On (with Talking CID)” (default): The handset and base unit use your cellular phone’s ringer tone. Caller information is announced even if the Talking Caller ID is turned off.

–“On (without Talking CID)”: The handset and base unit use your cellular phone’s ringer tone. Caller information is not announced even if the Talking Caller ID is turned on.

Important:

RTo use this feature, your cellular phone must support Bluetooth in-band ringtone. Refer to your cellular phone’s operating instructions.

Handset

1For CELL 1: MMENUN#6141

For CELL 2: MMENUN#6142

2MbN: Select the desired setting.

3 MSAVEN a MOFFN

Note:

RThe units use the preset ringer tones (page 39) instead of your cellular phone’s ringer tone when a cellular call is being received if:

–your cellular phone is in silent mode (depending on your cellular phone).

–the base unit is in use.

–2 handsets are sharing a landline call.

RIf your cellular phone is in silent mode with “On (with Talking CID)” set, the unit announces caller information even when Talking Caller ID is turned off (page 40).

To use the handset ringer tone instead of your cellular phone’s ringer tone

Select “Off” in step 2, “Ring as cell mode”, page 18.

To change the handset ringer tone for a cellular line, see page 38.

Auto connection to the cellular phone

After pairing, your cellular phone is connected to the base unit. If you move the cellular phone out of base unit range, the cellular phone is disconnected from the base unit. This feature allows the base unit to try to reconnect the cellular phone at regular

18For assistance, please visit http://www.panasonic.com/help