Panasonic KX-TG7845, KX-TG7873 Call block Caller ID subscribers, Only, Changing the handset name

1

Handset

6

7

exit.

Base unit

1

2

6

7

Programming

5 Enter the desired hour and minute you			2 Enter the desired name (max. 10
wish to end this feature.					characters; see the character table,
*: Select “AM” or “PM”.					page 32).
					R If not required, go to step 3.
MSAVEN a MOFFN			3
					MSAVEN
R When the silent mode is set,		is
			4 MbN: Select the desired setting. a
displayed.
			5		MSELECTN 2 times
					MOFFN
MMENUN#238
MbN: Select the desired setting. a			Call block (Caller ID subscribers
MSAVEN			only)
R If you select “Off”, press MEXITN to
				This feature allows the unit to reject calls when:
3 Enter the desired hour and minute you				– the unit receives a call from a phone
wish to start this feature.					number stored in the call block list as
					unwanted (“Storing unwanted callers”,
4 MAM/PMN: Select “AM” or “PM”. a MOKN
					page 45).
5 Enter the desired hour and minute you				– the unit receives a call without phone
wish to end this feature.					number (“Blocking incoming calls without
MAM/PMN: Select “AM” or “PM”.					phone number”, page 46).
				When a call is received, the unit rings for a
MSAVEN a MEXITN				short time*1 while the caller is being identified.
R When the silent mode is set,		is		If the phone number matches an entry in the
displayed.				call block list, the unit emits no sound to the
				caller, and disconnects the call.
Changing the start and end time				*1 This is called first ring. If you do not want
					the first ring to sound, turn this setting to
Handset / Base unit					“Off” (page 46).
1 MMENUN#237				Important:
2 Continue from step 3 for handset or step				R When the unit receives a call from a
3 for base unit, “Turning silent mode on/					number that is stored in the call block list or
					a call without a recognized phone number,
off”, page 44.
					the call is logged in the caller list
					(page 49) with after the call is
Changing the handset name
					disconnected.
Each handset can be given a customized				R You can program this setting using either
					the base unit or one of the handsets.
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
			Storing unwanted callers
handsets. You can also select whether or not
the handset name is displayed in standby			You can store up to 250 phone numbers in the
mode. The default setting is “No”. If you select
				call block list.
“Yes” without entering any handset name,				Important:
“Handset 1” to “Handset 6” is displayed.
				R We recommend storing 10 digits (including
					an area code). If only 7 digits are stored, all
MMENUN#104					numbers that have the same last 7 digits
					will be blocked.
				n From the caller list:
	For assistance, please visit http://www.panasonic.com/help					45