Copying phonebook from acellular phone (phonebooktransfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s shared phonebook. A
cellular phone must be compatible with
Bluetooth wireless technology.
Important:
RIf a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
RIf a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
RIf your cellular phone includes international
call entries, set the conversion codes
before copying (page 52).
1Handset:
MMENUN#618
2Handset:
To copy from paired cellular phones:
MbN: Select the desired cellular phone. a
MSELECTN
RCopied items are stored to the group
(“Cell 1” or “Cell 2”) which the
cellular phone is paired to.
To copy from other cellular phones
(not paired):
MbN: “Other cell” a MSELECTN a
MbN: Select the group you want to copy to.
a MSELECTN
3When “Use the cell to
transfer phone book” is displayed:
Go to step 4.
When “Select mode” menu is
displayed:
MbN: Select “Auto” or “Manual”. a
MSELECTN
“Auto”: Download all entries from the
cellular phone automatically. Go to step 5.
“Manual”: Copy entries you selected.
R“Select mode” menu is displayed
only when the cellular phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
4Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
RFor other cellular phones (not paired),
you need to search for and select the
base unit. The base unit PIN (default:
“0000”) may be required.
RThe entries being copied are displayed
on the handset.
5Handset:
Wait until “Completed” is displayed.
RYou can continue copying other entries
if necessary.
6Handset: MOFFN
Note:
RSome copied entries may have characters
which do not exist in the character table
(page 32). These characters can be
displayed but cannot be entered when
editing an entry.
RThe unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “H”.
RIf you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.

Setting conversion codes

You must first set the following 3 dialing codes
in the base unit which you want to copy to
before transferring the phonebook from your
cellular phone (each 4 digits max.).
–“International”: An international prefix
used when you make an international call.
–“Country code”: Your country code for
international calls.
–“National access”: A trunk prefix; the
initial digit(s) to be dialed in a domestic call,
prior to the area code.
Base unit
1MMENUN
2To store “International”: #117
To store “Country code”: #118
52 For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
TG78xx(en)_1210_ver101.pdf 52 2012/12/10 21:19:29