Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods.
Handset / Base unit
nScrolling through the display menus
1MMENUN
2Press MCN or MDN to select the desired main menu. a MSELECTN
3Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4Press MCN or MDN to select the desired setting. a MSAVEN
RThis step may vary depending on the feature being programmed.
RTo exit the operation, press MOFFN on the handset or MEXITN on the base unit.
nUsing the direct command code
1MMENUN a Enter the desired code.
Example: Press MMENUN#110.
For available code:
– Handset: see page 36.
– Base unit: see page 42.
2Select the desired setting. a MSAVEN
RThis step may vary depending on the feature being programmed.
RTo exit the operation, press MOFFN on the handset or MEXITN on the base unit.
Note:
RIn the following table, < > indicates the default settings.
RIn the following table, indicates the reference page number.
RDisplay menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
n Handset
Main menu: “Phonebook”
Operation Code
Viewing the phonebook entry. #280 33
Main menu: “Caller list”
Operation Code
Viewing the caller list. #213 49
Main menu: “Answering device”
Sub-menu 1 Sub-menu 2 Settings Code
Play new msg.
(msg.: message)
– – #323 58
36 For assistance, please visit http://www.panasonic.com/help
Programming
TG78xx(en)_1210_ver101.pdf 36 2012/12/10 21:19:28