Getting Started
Charging the cellular phone by
USB
Available for:
By connecting a USB cable (not supplied) to the cellular phone and the base unit, you can charge a cellular phone. However, the cellular phone cannot exchange data with the base unit through a USB cable.
Belt clip
n To attach | n To remove |
Display/Indicators
Handset display items
Item | Meaning |
| Within base unit range |
Item
1
Z
Meaning
Out of base unit range
The landline is in use.
RWhen flashing:
The call is put on hold.
RWhen flashing rapidly: An incoming call is now being received.
A cellular line is in use.
RWhen flashing:
The cellular call is put on hold.
RWhen flashing rapidly: A cellular call is being received.
A cellular phone is connected.*1 Ready to make/ receive cellular calls.
RWhen turned off:
A cellular phone is not connected to the base unit. (page 19)
–The cellular line is selected for the ringer setting.
–A cellular call is being received on that line.
Eco mode is on.*2 (page 12)
Noise reduction is set. (page 24)
Equalizer is set. (page 24)
Speakerphone is on. (page 21)
Ringer volume is off.*3 (page 22, 38)
Silent mode is on. (page 45)
Call sharing mode is off. (page 41)
Alarm is on. (page 44)
Handset number
Battery level
Blocked call (page 45)
14For assistance, please visit http://www.panasonic.com/help
