Useful Information
Problem
I cannot connect my headset to the base unit.
Some headset enhanced features are not available.
An error tone is heard when I try to program the Bluetooth feature.
Text message alert is not announced.
Cause/solution
RConfirm that your headset is turned on.
RIf your headset is already connected to another Bluetooth device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit.
RIf someone is using a cellular line, you cannot connect the headset. There can be only one active Bluetooth connection at a time.
RThe headset has not been paired to the base unit. Pair the headset (page 54).
RThe base unit does not support enhanced features such as Last number redial or Call reject.
RThe Bluetooth feature cannot be accessed immediately after connecting the AC adaptor to the base unit. Wait a few seconds and try again.
RThe headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again.
RThe text message alert announcement depends on the
“Ring as cell (limited)” setting (page 18) and the “Talking Caller ID” setting (page 40, 42).
To make the unit announce text message alerts, there are 2 methods available, depending on whether or not you want the unit to emit the same ring as the cellular phone when a call is being received on the cellular phone.
–If you prefer the same ring as the cellular phone, select “On (with Talking CID)” of the “Ring as cell (limited)” setting.
–If you prefer the same ring as the unit, select “Off” of the “Ring as cell (limited)” setting, and select “On” of the “Talking Caller ID” setting on the handset and base unit.
74For assistance, please visit http://www.panasonic.com/help
