Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1Press MZN when the unit rings.
RYou can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2Speak into the microphone.
3When you finish talking, press MZN.

Adjusting the base unit ringer volume

nWhile the base unit is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
nProgramming the volume beforehand:
1To change the cellular line ringer
volume:
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
MMENUN#160
2MbN: Select the desired volume.
3MSAVEN a MEXITN
Useful features during acall

Hold

This feature allows you to put an outside call
on hold.
1Press MHOLDN during an outside call.
2To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
RA handset user can take the call:
MCELLN*1 a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
To release hold on the landline:
Press MZN.
RA handset user can take the call by
pressing MN.
Note:
RWhile a landline call is on hold, the
SP-PHONE indicator flashes.
RIf a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
RIf another phone is connected to the same
line, you can also take the landline call by
lifting its handset.

Mute

While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1Press MMUTEN during conversation.
RThe SP-PHONE indicator on the base
unit flashes.
2To return to the conversation, press
MMUTEN again.

Flash for landline calls

MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
RTo change the flash time, see page 41.

For call waiting or Call Waiting

Caller ID service users

To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
For assistance, please visit http://www.panasonic.com/help 29

Making/Answering Calls Using the Base Unit

TG78xx(en)_1210_ver101.pdf 29 2012/12/10 21:19:27