Panasonic KX-TG365SK Power back-up operation for landline, MbN Hold a Mselectn To make a 2nd call

Making/Answering Calls Using the Handset

2MbN: Select the desired cellular phone. a

MSELECTN

R The call is transferred to the handset.

Using the other line during a conversation

You can handle a cellular call and a landline call at the same time. When another call is being received during a conversation, the interrupt tone sounds (page 39), and the 2nd caller’s information is displayed if you subscribe to Caller ID (page 48). You can answer the 2nd call while holding the 1st call.

Making/answering a cellular call during a conversation on the landline

1Press MMENUN during a landline call.

2 MbN: “Hold” a MSELECTN

3To make a 2nd call:

Dial the phone number. a MCELLN*1 a MbN: Select the desired cellular phone. a

MSELECTN

*1 The unit starts dialing when:

–only 1 cellular phone is paired.

–a specific line is set to make cellular calls (page 20).

To answer a 2nd call:

MCELLN

RTo hold the 2nd call: MMENUN a MbN: “Hold” a MSELECTN

4To hang up the 2nd call and return to the 1st call (landline call), press MOFFN, then press MN.

Making/answering a landline call during a conversation on a cellular line

1Press MMENUN during a cellular call.

2 MbN: “Hold” a MSELECTN

3To make a 2nd call:

Dial the phone number. a MN

To answer a 2nd call:

MN

R To hold the 2nd call: MMENUN a MbN: “Hold” a MSELECTN

4To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN.

Power back-up operation for landline

When a power failure occurs, the charged handset temporarily supplies power to the base unit (power back-up mode). This allows you to make and receive landline calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and shared phonebook are available only when using a handset other than the handset supplying power to the base unit. You can program “Power failure” and the default setting is “Auto” (page 41).

Important:

RIf a handset is not placed on the base unit when a power failure occurs, “Base no power Press OFF” is displayed. After pressing MOFFN on the handset, place it on the base unit to start power back-up mode.

RPower back-up mode will not work if the battery level of the power supplying handset is or .

RDo not lift the power supplying handset from the base unit during power back-up mode.

RDo not touch the handset’s charge contacts during power back-up mode.

RIf the battery level is low, the unit will not work sufficiently during power back-up mode. In addition, in case handset battery power runs out, we recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 4).

For assistance, please visit http://www.panasonic.com/help 25