Programming
Handset
nWhen a cellular phone is paired:
1 MCN CID
2 MbN: Select the entry to be blocked. a
MSELECTN
R To edit the number, press * repeatedly until the phone number is shown in the
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary
(24 digits max.).
7 MSAVEN a MOFFN
nWhen a cellular phone is not paired:
1 MCN CID
2 MbN: Select the entry to be blocked. R To edit the number: MMENUN a
MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the
3 MMENUN
4 MbN: “Save CID” a MSELECTN
5 MbN: “Call block” a MSELECTN
6 MbN: “Yes” a MSELECTN
7 Edit the phone number if necessary
(24 digits max.).
8 MSAVEN a MOFFN
1MCIDN
2MbN: Select the entry to be blocked. R To edit the number, press MEDITN
repeatedly until the phone number is shown in the
3MSAVEN
4MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6Edit the phone number if necessary (24 digits max.).
7MSAVEN a MEXITN
n By entering phone numbers:
Handset
1MMENUN#217
2MMENUN a MbN: “Add” a MSELECTN
3Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN.
4MSAVEN a MOFFN
Base unit
1MMENUN#217 a MADDN
2Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN.
3MSAVEN a MEXITN
Blocking incoming calls without phone number
You can reject a call when no phone number is provided, such as a call just showing “Out
of area”.
Handset / Base unit
1MMENUN#240
2MbN: Select the desired setting. a
MSAVEN
3Proceed with the operation for your unit. Handset: MOFFN
Base unit: MEXITN
Note:
RWhen the unit receives a cellular call without a phone number, the call may not be rejected.
Setting the first ring for the call block list
Handset / Base unit
If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. The default setting is “On”.
1MMENUN#173
2MbN: Select the desired setting. a
MSAVEN
46For assistance, please visit http://www.panasonic.com/help
