Caller ID Service
Editing a caller’s phone number before calling back
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
Handset
nWhen a cellular phone is paired:
1 MCN CID
2 MbN: Select the desired entry.
3 Press MSELECTN, then press * repeatedly until the phone number is shown in the desired format.
ALocal phone number
Example: 321-5555
BArea code – Local phone number
Example: 555-321-5555
C1 – Area code – Local phone number
Example:
4Using a cellular line:
To make a cellular call, continue from step 4, “Viewing the caller list and calling back”, page 49.
Using the landline:
M
N
nWhen a cellular phone is not paired:
1 MCN CID
2 MbN: Select the desired entry.
3 MMENUN a MbN: “Edit” a
MSELECTN
4 Press MEDITN repeatedly until the phone number is shown in the desired format.
ALocal phone number
Example:
BArea code – Local phone number
Example:
C1 – Area code – Local phone number
Example:
5M
N
Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:
–When the call is being received, the Caller ID number is displayed in the same format as the edited number.
–After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller list.
For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code.
To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.
This feature can be set for each unit (page 40, 43). The default setting is “On”.
50For assistance, please visit http://www.panasonic.com/help
