SETTING UP THE METER

The OneTouch® FastTake® Meter comes with the date, time, and unit of measurement preset. However, if you need to change the time, or if you remove the batteries, you will need to enter the setting mode and reset. You will not be able to perform a blood glucose test until you have set up the meter completely.

CAUTION: Check your OneTouch® FastTake® System to be sure the outer carton seal is not missing or broken. If either of these conditions occurred, please call the OneTouch® Customer Care Line at 1 800 663-5521.

Setting the Date, Time, and Unit of Measurement

To set the date, you must first enter the setting mode. Start with the meter off. Then press and hold the M button for three seconds. The meter is now in the setting mode.

STEP 1 Set the Year.

The year setting will appear first. Press and release the C button to advance one year. To move faster, hold the C button down. With the correct year on the display, press the M button and the month and day will appear on the display with the month segment flashing.

36

Page 46
Image 46
Lifescan OneTouch manual Setting UP the Meter, Set the Year, Setting the Date, Time, and Unit of Measurement