VR800 Owner’s Manual (Changing the initial setting: SETUP mode)
3. Use the JOG dial to turn the mode [on] or [off].
When you turn the JOG dial clockwise and counter- clockwise, [on] and [o FF] flash alternately.
Selecting [on] turns BAR/BEAT resolution mode on, and selecting [o FF] turns BAR/BEAT resolution mode off.
4. Press the EXECUTE/YES key.
The selected mode setting is stored, and [?] flashes.
To cancel the operation, or to restore the setting obtained prior to the EXECUTE/YES key press, press the STOP button or the EXIT/NO key. Each time you press one of these keys, the VR800 returns to the previous hierarchy level of the menu, and finally exits SETUP mode and displays the previous Time Base.
Setting the MIDI device number (“Device ID ?” menu)
The “Setting the MIDI device number” menu enables you to set the VR800 device ID number required to control the unit from a sequence software using MMC (MIDI Machine Control) or FEX (Fostex System Exclusive Message). The transmit device ID links to this setting. You can set the device ID from 00 to 99.
However, if the device ID number of the message the VR800 receives is [7F], the VR800 will recognizes it to perform the corresponding operation, regardless of its device ID setting.
• Initial setting | : [00] |
• Device ID | : [00] ~ [99] |
*This setting is shared by all Programs in the same disk.
*The settings cannot be saved and loaded as part of the song data.
*The settings are maintained after you turn off the power to the unit.
Setting the MIDI device ID
1.While the VR800 is stopped, press the SETUP key to enter SETUP mode.
2.Turn the JOG dial to select [Device ID?] ([?] flashes),
then press the EXECUTE/YES key.
The current MIDI device ID number appears on the display. Pressing the EXECUTE/YES key turns off the flashing [?] character, and the MIDI device ID number flashes. With the initial setting, [00] flashes as shown below.
4. Press the EXECUTE/YES key.
The MIDI device ID number is stored, and [?] flashes.
To cancel the operation, or to restore the setting obtained prior to the EXECUTE/YES key press, press the STOP button or the EXIT/NO key. Each time you press one of these keys, the VR800 returns to the previous hierarchy level of the menu, and finally exits SETUP mode and displays the previous Time Base.
| DIGITAL |
| 44.1kHz |
| ||||
|
|
| SETUP |
| ||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| SYNC OUT |
| DRIVE |
| ||||
| CLK |
|
|
| SCSI |
| ||
|
|
|
|
|
|
|
|
|
| AUTO |
| A.PUNCH |
| ||||
|
|
|
|
|
|
|
|
|
|
| DIGITAL |
| 44.1kHz |
| ||||
|
|
|
| SETUP |
| ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SYNC OUT |
| DRIVE |
| ||||
|
| CLK |
|
|
| SCSI |
| ||
|
|
|
|
|
|
|
|
|
|
|
| AUTO |
| A.PUNCH |
| ||||
|
|
|
|
|
|
|
|
|
|
flashes
flashes
3. Use the JOG dial to set the desired MIDI device ID number.
Turning the JOG dial clockwise increments the value, and turning it
