Fostex VR800 owner manual Auto Repeat, Start playback a little before the Auto RTN Start point

Models: VR800

1 122
Download 122 pages 2.66 Kb
Page 56
Image 56

VR800 Owner’s Manual (Locate Function)

Auto Repeat

The Auto Repeat function allows the VR800 to repeat playback up to the AUTO RTN END point, automatically locate the AUTO RTN START point, then play up to the AUTO RTN END point until you cancel the function by pressing the STOP button. To enable this function, both AUTO PLAY mode and AUTO RTN mode should be turned on, and the AUTO RTN START point and the AUTO RTN END point should already be set.

Using this function will facilitate the Auto Punch In/Out and Manual Punch In/Out rehearsal. See “Hint” after the following section.

<Operation of the Auto Repeat mode.>

AUTO RTN START point

AUTO RTN END point

PLAYBACK

PLAYBACK

 

START

 

 

LOCATE

1. Store the AUTO RTN START and AUTO RTN END points.

Refer to the chapter “Storing a Locate Point (Edit Point)” on page 48 for information on storing the desired points in the AUTO RTN START key and the AUTO RTN END key.

2.Press the AUTO RTN/AUTO PLAY key to turn on the [PLAY] and [RTN] indicator on the bottom of the display.

AUTO

PLAY RTN

Lights up

3. Start playback a little before the AUTO RTN START point.

The VR800 operates as shown in the diagram, and stops at the AUTO RTN START point.

You can set a preroll time in the [Preroll Time?] menu in SETUP mode so that the VR800 will start playback preroll time before the locate point. You can set the preroll time from 0 to 10 seconds. Refer to the chapter “Changing the Initial Settings (SETUP Mode)” on page 94.

<Hint>

You can make repeated Auto Punch In/Out rehearsal much easier and quicker by using the Auto Repeat function.

Set the AUTO RTN START point prior to the AUTO PUNCH IN point, and set the AUTO RTN END point after the AUTO PUNCH OUT point. The recorder will repeat the operation automatically so you can concentrate on your rehearsal.

Cancel Auto Repeat mode before you record a take.

The VR800 will play this range repeatedly for rehearsal, which makes it easy for you to check the recording level and practice your performance.

AUTO PUNCH IN point

AUTO PUNCH OUT point

AUTO RTN START point

AUTO RTN END point

Rehearsal range

PLAYBACK

PLAYBACK

START

LOCATE

56

Page 56
Image 56
Fostex VR800 owner manual Auto Repeat, Start playback a little before the Auto RTN Start point