
* Auto Return mode
When the AUTO RTN END point is reached while the recorder section is playing, the VR800 automatically locate the AUTO RTN START point. This mode is effective only if the AUTO RTN START point and the AUTO RTN END point have already been specified.
Note: The auto return function is enabled only when the VR800 is playing. While the VR800 is recording, the VR800 will not locate the START point after it reaches the AUTO RTN END point.
*Auto Repeat mode
This mode is effective only when auto play mode and auto return mode are turned on. The VR800 will play the part between the AUTO RTN START point and the AUTO RTN END point repeatedly. This mode is also effective only if the AUTO RTN START point and the AUTO RTN END point have already been specified.
Refer to page 54 for more information on each mode.
18.Vari Pitch key [VARI PITCH/ P.EDIT ]
This key toggles vari pitch mode on and off. When vari pitch mode is on, the “VARI PITCH” indicator lights up on the display, and the VR800 plays using the current pitch data. Pressing the VARI PITCH key while holding down the SHIFT key will cause the VR800 to enter edit mode, in which you can change pitch data in
To exit edit mode, press the EXIT/NO key.
Refer to Quick operation guide for more information on
playing with Vari Pitch and editing Vari Pitch data.
19. Shift key [ SHIFT ]
Press a key, button, or turn the dial while holding down the SHIFT key to activate the following
You can audition the data at edit points |
|
(locate points) stored in the memory | The removable SCSI disk is |
keys. (For more information, refer to | ejected. (Refer to “Formatting a |
“Preview function” on page 59.) | disk” on page 31.) |
VR800 Owner’s Manual (Names and Functions)
20. Fast forward button [F FWD]
Pressing this button while the VR800 is stopped will start fast forwarding at low speed at first, then gradually accelerate to
Refer to the “STOP button” section and page 48 for more
information on the “LOCATE REC END” operation.
21. Rewind button [REWIND]
Pressing this button while the VR800 is stopped will start rewinding at low speed at first, and then gradually increase speed up to
Refer to the “STOP button” section and page 48 for more
information on the “LOCATE ABS 0” operation.
22. Play button [PLAY]
Pressing this button causes the recorder section to play back. Pressing this button while holding down the RECORD button when a track is in READY mode will cause the VR800 to start recording on the READY track.
Pressing only this button during the recording operation will
* Refer to the “STOP button” section and page 62 for more |
information on the “CLIPBOARD PLAY” operation. |
|
| AUTO RTN |
| CLIPBOARD | |
| AUTO PUNCH |
|
|
| |
START | IN | OUT | END | IN | OUT |
|
|
| PREVIEW |
|
|
HOLD/ | STORE | EDIT | UNDO / REDO | DISP SEL | SETUP |
| PGM SEL |
|
|
|
|
|
| AUTO RTN |
|
|
|
| VARI PITCH | AUTO PLAY | LOCATE | TIME BASE SEL | SCRUB |
SHIFT | P.EDIT |
| LOC MEM |
|
|
| RECORD | STOP | PLAY | REW | F FWD |
| AUTO | CLIPBOARD PLAY |
|
| |
| PUNCH | LOCATE ABS | 0 |
|
|
LOCATE REC END
EXIT |
| EXECUTE | ||
/ NO |
|
| / YES | |
|
|
|
|
|
EJECT |
|
|
| |
|
| JOG |
| |
|
| SHUTTLE |
The SHUTTLE f u n c t i o n i s activated. (Refer to “Cue & review function using the
S H U T T L E function” on page 57 for more information.)
* Refer to page 41 for more information on the Punch Out |
operation using the PLAY button. |
23. Stop button [STOP] |
Pressing this button during the playback, recording, fast forward, or rewind operation will stop the recorder transport operation. Pressing this button while the VR800 is in SETUP
Auto punch mode |
|
|
turned on and off. |
| You can edit locate data stored |
(Refer to “Punch | You can edit Vari Pitch | |
In/Out” on page | data. (Refer to Quick | in the LOCATE key. (Refer to |
36.) | operation guide for more | “Storing an edit point (locate |
| information on “Playback | point)” on page 48 for more |
| in Vari Pitch mode”.) | information. |
mode will cause the unit to exit SETUP mode.
Pressing the PLAY, REWIND, or F FWD button while holding down the STOP button will start the following operations. If you wish to rehearse the manual Punch In/Out operation using the foot switch, press the foot switch while holding down this button to enter the rehearsal mode.
11