Fostex VR800 owner manual Edit and re-store data that is already stored

VR800 Owner’s Manual (Storing a Locate Point <Edit Point>)

2.Press the HOLD/> key, REWIND button, or the F FWD button to move the flashing cursor on the time value digit, and use the JOG dial to increase or decrease the value.

3.Press the STORE key. (the STORE key lamp lights up.)

4.Select the LOCATE number desired using the JOG dial.

5.Press the LOCATE key.

The edit time data is stored as the time data for the selected LOCATE number.

Edit and re-store data that is already stored

RECALL the desired time data already stored in the LOCATE key, edit that data and re-store it.

1, 2

5

OPTICAL
ACCESS
OL
0
6
12
24
1 2 3 4 5 6 7 8	A SYNC

RECORD TRACK

1	2	3	4	5	6	7	8
		AUTO RTN		CLIPBOARD
	AUTO PUNCH					EXIT	EXECUTE
START	IN	OUT	END	IN	OUT	/ NO	/ YES
			PREVIEW			EJECT
HOLD/	STORE	EDIT	UNDO / REDO	DISP SEL	SETUP
PGM SEL
		AUTO RTN					JOG
	VARI PITCH	AUTO PLAY	LOCATE	TIME BASE SEL	SCRUB		SHUTTLE
SHIFT	P.EDIT		LOC MEM
RECORD		STOP	PLAY	REW	F FWD
AUTO		CLIPBOARD PLAY
PUNCH		LOCATE ABS	0
		LOCATE REC END

3

2, 4

2

1. Press the LOCATE key, while holding down the SHIFT key, while the VR800 is stopped.

The menu to select the LOCATE number will appear.

DIGITAL	44.1kHz
	Flashing
SYNC OUT	DRIVE
CLK	SCSI
AUTO	A.PUNCH

2. Turn the JOG dial to select the desired LOCATE number, then press the LOCATE key.

The data edit mode will appear when the data stored in the selected LOCATE number appears.

Flashing

•If the STORE key is press instead of the LOCATE key at this stage, it becomes possible to directly LOCATE the time data of the selected LOCATE number. For more details refer to the next section on “Location Functions.”

5.You can use the JOG dial to input the desired LOCATE number.

6.Press the LOCATE key.

The edit time data is stored as the time data for the selected LOCATE number.

ABS

LOC M

DIGITAL		44.1kHz
S	F	SF
SYNC OUT		DRIVE
CLK		SCSI
AUTO		A.PUNCH

53