Executing Paste
4. Press the EXECUTE/YES key again.
The display indication enables you to set the number of the paste operations. The number and [SURE ?] flash. At this time, the flashing RECORD TRACK select key’s lamp becomes continuously lit.
DIGITAL | 44.1kHz |
Flashing
SURE ?
SYNC OUT |
| DRIVE | ||||
CLK |
|
|
| SCSI | ||
|
|
|
|
|
|
|
AUTO |
| A.PUNCH | ||||
|
|
|
|
|
|
|
5. Select a destination track to paste data.
All selected tracks’ lamps light up.
You can select only mono tracks as the destination of a copied or moved mono track. If you copied or moved adjacent
If you do not select any tracks, the data will be pasted back to the copy or move source track.
6. Turn the JOG dial to enter the number of repeats (Repeat=**).
You can enter up to 99. However, this is automatically limited by the available recording space on the disk. That is, if the disk has enough free space, you can set up to 99 repeats. If the disk has only a small amount of free space, the JOG dial allows you to set a lower number of repeats.
7. Press the EXECUTE/YES key.
[Copy Paste] (or [Move Paste]) flashes and the duration of the pasted data appears as a negative number on the display. This number will count down as the paste operation proceeds.
When the paste operation is complete, the flashing [Copy Paste] (or [Move Paste]) lights up continuously, and [COMPLETED !] is displayed.
Note: If you try to execute the paste operation by pressing the EXECUTE/YES key when the disk has insufficient free space, [Over !] appears on the display and edit mode is cancelled. In this case, you need to delete unnecessary data or Programs. Refer to the following section, “Erase,” and to “Deleting a Program” on page 34 for more information on erasing.
8. Press the STOP button or the EXIT/NO key.
The VR800 exits edit mode and displays the previous Time Base indication.
9.Turn off the RECORD TRACK select key of the copy (or move) source track.
VR800 Owner’s Manual (Editing Tracks)
Undo/Redo Paste
You can undo or redo a Copy & Paste and Move & Paste operation.
•To restore the data that existed prior to the paste operation, press the UNDO/REDO key.
•To restore the pasted data after you undo the paste operation, press the UNDO/REDO key again.
Note: The Undo/Redo function is effective only when the VR800 is stopped.
Note: If you perform one of the following operations after you use the Copy & Paste or Move and Paste operation, the Undo/Redo function will no longer be effective.
1.When a new recording is made.
2.When a new editing is executed (such as Copy & Paste, Move & Paste, Erase).
3.While in the AUTO PUNCH ON mode, when the AUTO PUNCH IN point is passed in the PLAY (or RECORD) mode.
4.When the power is momentarily switched off.
5.When the program is changed.
6.When ejecting a removable SCSI disk that is the current drive..
63
