![](/images/new-backgrounds/1280210/280210229x1.webp)
VR800 Owner’s Manual (MIDI Implementation Chart/MMC List)
14 03 : Tempo map all erase command
When this command is received, this equipment will erase all meter and tempo data in the current program and thus return it to the default state (meter=4/4, tempo: =120). Also, when this command is received, this equipment will reply with "34 03 (<edit message>)." Upon completing the registeration, <edit message> will reply with "01 (completed)," or with "10 (over value error)" if registeration is attempted at a
14 04 (<mmc time>): Preroll time set command
The command for setting the current program preroll time at the figure indicated by <mmc time>.
14 06 (<frame rate>): Frame rate set command
The command for setting the current program frame rate at the figure indicated by <frame rate>.
14 08 (<time base>): Time base set command
The command for setting the current program time base of this equipment to that indicated by <time base>.
(<edit message=14 (void data)>)."
22 46: copy paste status request
The command inquiring execution status of copy paste edit- ing. When this command is received, VR800 will reply with either "32 46 (<edit message=02><mmc time>)" or "32 46 (<edit message=00>)." <mmc time> indicates unprocessed time un- til completion.
22 47: erase status request
The command inquiring execution status of erase.
When this command is received, VR800 will reply by either "32 47 (<edit message=02><mmc time>)" or "32 47 (<edit message=00>)." <mmc time> indicates unprocessed time un- til completion.
22 4D: move clip status request
The command inquiring the clipboard status. If there is a move paste data on the clipboard, VR800 will reply with "32 4D (<edit message=01>)." If data in the clipboard is for copy paste or there is no valid data on it, "32 4D (<edit message=14 (void data)>)" will be replied.
The Status Request Command
22 21: loop operation status request
The command inquiring the loop operation mode setup sta- tus. VR800 will reply with "32 21 (<loop op.mode=12>)."
22 22: loop on/off status request
The command inquiring the loop on/off (=ON/OFF of AUTO RETURN) setup status. VR800 will reply with "32 22 (<on/ off>)."
22 28: post locate status request
The command inquiring the post locate mode (ON/OFF of AUTO PLAY) setup status. VR800 will reply with "32 28 (<post locate mode>)".
22 2D: auto rec status request
The command inquiring the auto rec mode setup status and this is replied by "32 2D (<edit message>)." Reply from VR800 against this status request will be either one of the following:
<edit message> =05: Possible to undo rehearsal mode. =06: Possible to undo take mode. =25:Unpossible to undo rehearsal mode.
=26: Unpossible to undo take.
=72: off
22 41: lock status request
The command inquiring the slave on/off setup status and the lock status. VR800 will reply with "32 41 (<lock status>)."
22 4E: move paste status request
The command inquiring the move paste execution status. When this command is received, VR800 will reply with "32 4E (<edit message=02><mmc time>)" or "32 4E (<edit mes- sage=00>)." <mmc time> indicates unprocessed time until completion.
23 41: digital in channel status request
23 41: adat in channel status request
The command inquiring the digital in channel setup status. When this command is received, VR800 will reply with "33 41 (<channel><channel>)" or "33 41 (<channel=7F><count><mmc track>)."
23 42: digital out channel status request
23 42: adat out channel status request
The inquiring the digital out channel setup status.
When this command is received, VR800 will reply with “33 42 (<channel><channel>)” or “33 42 (<channel=7F><channel=0>).
23 43: program status request
The command inquiring the presently operating program num- ber. When this command is received, VR800 will reply with "33 43 (<program>)."
23 44: click on/off status request
The command inquiring the metronome on/off status of VR800. When this command is received, VR800 will reply with "33 44 (<on/off>)."
22 42 : lock mode status request
The command for inquiring the lock mode setup status and this is replied with "32 42 <lock mode>."
22 45: copy clip status request
The command inquiring the clipboard condition. If there is a copy paste data in the clipboard, VR800 will reply with "32 45 (<edit message=01>)." If data in the clipboard is for move paste or there is no valid data in it, it will reply will "32 45
23 45: level status request
The command inquiring the present output level data of the 1~8 tracks. In VR800 as the level data is updated about every 40msec., inquiry in 40msec. units is effective.
When this command is received, VR800 will reply with "33 45 (<count=10><level data>)."
23 46: resolution status request
The command for inquiring the resolution on/off setup status.