VR800 Owner’s Manual (Cue & Review Function)
Digital scrubbing using the SCRUB function
You may perform digital scrubbing using the “SCRUB Function” of the VR800 while the recorder section is stopped. The scrub function allows digital scrubbing for each track recorded. The display will show the envelope indication of the track selected.
OPTICAL
ACCESS
OL 0
6
12
24
1 2 3 4 5 6 7 8 | A SYNC |
|
|
| RECORD TRACK |
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
| AUTO RTN |
| CLIPBOARD |
|
| |
| AUTO PUNCH |
|
|
| EXIT | EXECUTE | |
START | IN | OUT | END | IN | OUT | / NO | / YES |
|
|
| PREVIEW |
|
| EJECT |
|
HOLD/ | STORE | EDIT | UNDO / REDO | DISP SEL | SETUP |
|
|
PGM SEL |
|
|
|
|
|
|
|
|
| AUTO RTN |
|
|
|
| JOG |
| VARI PITCH | AUTO PLAY | LOCATE | TIME BASE SEL | SCRUB |
| SHUTTLE |
SHIFT | P.EDIT |
| LOC MEM |
|
|
|
|
RECORD |
| STOP | PLAY | REW | F FWD |
|
|
6 |
| CLIPBOARD PLAY |
|
|
|
| |
AUTO |
|
|
|
|
| ||
PUNCH |
| LOCATE ABS | 0 |
|
|
|
|
LOCATE REC END
1. Press the SCRUB key while the VR800 is stopped.
2, 5
1
3
The SCRUB key’s lamp lights up. The VR800 enters scrub mode and displays [Select TRK], instrucing you to select the desired track.
| DIGITAL |
|
| 44.1kHz |
|
|
| ||
| SYNC OUT |
| DRIVE | |
| CLK | SCSI | ||
|
|
|
| |
| AUTO |
| A.PUNCH | |
<Turning the JOG dial in the forward direction>
| DIGITAL |
| 44.1kHz |
ABS |
|
|
|
M | S | F | SF |
Playback point | CLK |
| SCSI |
| SYNC OUT |
| DRIVE |
| AUTO |
| A.PUNCH |
t
Note: You can select one track at a time.
If you try to select two or more RECORD TRACK select key, the VR800 will ignore your operation.
2. Press the desired RECORD TRACK select key to select a track for digital scrubbing.
The screen changes, indicating that the VR800 is in “STILL” status (Scrub mode is “still”).
The selected RECORD TRACK select key’s lamp flashes.
<Turning the JOG dial in the reverse direction>
| DIGITAL |
| 44.1kHz |
ABS |
|
|
|
M | S | F | SF |
Playback point |
|
|
|
| SYNC OUT |
| DRIVE |
| CLK |
| SCSI |
| AUTO |
| A.PUNCH |
t
4.Adjust the monitor sound of the selected track so that it can be monitored on the mixer.
| DIGITAL |
| 44.1kHz |
ABS |
|
|
|
M | S | F | SF |
| SYNC OUT |
| DRIVE |
| CLK |
| SCSI |
| AUTO |
| A.PUNCH |
3. Turn the JOG dial to perform digital scrubbing.
The envelope of data recorded on the selected track appears during digital scrubbing.
5. Press the RECORD TRACK select key of the desired record track to select another track.
[Please Wait!] will briefly appear and then go to the envelope indication of the selected track.
6. Press the STOP button to stop the digital scrubbing.
Doing so will turn OFF the scrub mode. The VR800 will return to the time base indication prior to turning the envelope function ON.
58
