![](/images/new-backgrounds/1280210/28021099x1.webp)
VR800 Owner’s Manual (Storing a Locate Point <Edit Point>)
Editing and storing locate data
If you know the position of the desired locate point, follow the steps below.
OPTICAL
ACCESS
OL 0
6
12
24
1 2 3 4 5 6 7 8 | A SYNC |
4
1, 2
|
|
| RECORD TRACK |
| |
1 | 2 | 3 | 4 | 5 | 6 |
|
| AUTO RTN |
| CLIPBOARD | |
| AUTO PUNCH |
|
|
| |
START | IN | OUT | END | IN | OUT |
|
|
| PREVIEW |
|
|
HOLD/ | STORE | EDIT | UNDO / REDO | DISP SEL | SETUP |
PGM SEL |
|
|
|
|
|
|
| AUTO RTN |
|
|
|
| VARI PITCH | AUTO PLAY | LOCATE | TIME BASE SEL | SCRUB |
SHIFT | P.EDIT |
| LOC MEM |
|
|
RECORD |
| STOP | PLAY | REW | F FWD |
AUTO |
| CLIPBOARD PLAY |
|
| |
PUNCH |
| LOCATE ABS | 0 |
|
|
LOCATE REC END
2
78
EXIT |
| EXECUTE |
/ NO |
| / YES |
|
|
|
EJECT |
|
|
| JOG | |
| SHUTTLE |
3
2
1. Press the HOLD/> key while the VR800 is stopped.
The
Flashing
|
| DIGITAL |
| 44.1kHz |
| ABS |
|
|
|
LOC | M | S | F | SF |
|
| SYNC OUT |
| DRIVE |
|
| CLK |
| SCSI |
|
| AUTO |
| A.PUNCH |
3. Press the STORE key.
The [Press LOC:] menu will appear as indicated before. Ignore this go to the next step.
DIGITAL | 44.1kHz |
| Flashing |
SYNC OUT | DRIVE |
CLK | SCSI |
AUTO | A.PUNCH |
2.Press the HOLD/> key, REWIND button, or the F FWD button to move the flashing cursor on the time value digit, and use the JOG dial to increase or decrease the value.
4. Press the desired memory key.
The STORE key lamp will turn off.
The input time value (or bar/beat/clock value) is stored in the corresponding memory key.
Editing and storing data
You can recall data stored in the memory key, edit it, and store it. again
1. While the VR800 is stopped, press the memory key that stores the data you wish to edit.
The stored data appears on the display and the VR800 enters data edit mode.
2.Press the HOLD/> key, REWIND button, or the F FWD button to move the flashing cursor on the time value digit, and use the JOG dial to increase or decrease the value.
3. Press the STORE key.
The [Press LOC:] menu will appear as indicated before. Ignore this go to the next step.
4. Press the memory key that you pressed in Step 1 again.
The STORE key lamp will turn off. The edited data is stored, and the VR800 displays the previous Time Base indication.
50