VR800 Owner’s Manual (Locate Function)
Locate Function
The VR800 swiftly locates (it moves the current location of the recorder section) the desired point when necessary. Locate include edit points (in ABS time, MTC time, or in bar/beat/clock) that are stored for the Copy, Move, Paste, Erase, or Auto Punch In/Out operations.
They also include Locate by specifying a voluntary time, and Locate specifying a voluntary Locate Number (01- 99), as well as Locate directly to the recording end point in a Program (REC END). An application of he Locate function includes auto functions such as Auto Play, Auto Return and Auto Repeat.
Direct Locate
The Direct Locate function enables you to locate the following points:
• Locate the beginning of the Program (LOCATE ABS 0)
Press the REWIND button while holding down the STOP button.
The VR800 will immediately locate the beginning of the currently- selected Program.
RECORD | STOP | PLAY | REW | F FWD |
AUTO | CLIPBOARD PLAY |
|
| |
PUNCH | LOCATE ABS | 0 |
|
|
LOCATE REC END
•Locate the recording end point of the Program (LOCATE REC END)
Press the F FWD button while holding down the STOP button.
The VR800 will immediately locate the end point of the currently- selected Program.
RECORD | STOP | PLAY | REW | F FWD |
AUTO | CLIPBOARD PLAY |
|
| |
PUNCH | LOCATE ABS | 0 |
|
|
LOCATE REC END
• Locate the position stored in one of the memory keys
Press the desired memory key, then press the LOCATE | |||||
key. |
|
|
|
|
|
The VR800 will locate the point (edit point) stored in the | |||||
corresponding memory key immediately. |
|
| |||
|
| AUTO RTN |
| CLIPBOARD |
|
| AUTO PUNCH |
|
|
| |
START | IN | OUT | END | IN | OUT |
|
|
| PREVIEW |
|
|
HOLD/ | STORE | EDIT | UNDO / REDO | DISP SEL | SETUP |
| PGM SEL |
|
|
|
|
|
| AUTO RTN |
|
|
|
| VARI PITCH | AUTO PLAY | LOCATE | TIME BASE SEL | SCRUB |
SHIFT | P.EDIT |
| LOC MEM |
|
|
The located time data is always stored as time data in locate number | |||||
“00.” |
|
|
|
|
|
•Specify the locate number to locate data
1.Press the LOCATE key, while holding down the SHIFT key.
The locate number selection menu appears.
DIGITAL | 44.1kHz |
SYNC OUT | DRIVE |
CLK | SCSI |
AUTO | A.PUNCH |
2.Turn the JOG dial or press the LOCATE key, while holding down the SHIFT key to select the desired number.
3.Press the LOCATE key once.
The time stored in the selected locate number appears.
|
| DIGITAL |
| 44.1kHz |
| ABS |
|
|
|
LOC | M | S | F | SF |
|
| SYNC OUT |
| DRIVE |
|
| CLK |
| SCSI |
|
| AUTO |
| A.PUNCH |
4.Press the LOCATE key again.
The time data of the selected locate number is swiftly located. The located time data is constantly stored as time data in locate number “00.”
•Locate a specified point
Refer to “Editing and storing locate data” in the chapter “Storing a Locate Point (Edit Point)” for information on how to edit the data and on pressing the LOCATE key instead of the STORE key. The point at specified time value (or bar/beat/clock value) will be located immediately.
• Locate the last-located point
Directly press the LOCATE key.
The time data of Locate number 00 is located. Locate number 00 is always update with the last data located (excluding LOCATE ABS 0 and LOCATE REC END). Therefore, you will locate the data in memory number 00 every time you directly press the LOCATE key.
LOCATE
LOC MEM
54
