27
ENG
English
Using CLOUD Solution
USING CLOUD SOLUTION
If the network is not properly connected (e.g., dur-
ing portal boot up), or connection is being created,
the "Network connection lost. Waiting for connec-
tion …" message is displayed on the Connection
screen.
Figure 2-2 shows the message displayed when the
network is not ready.
If the network is connected and IP is being ac-
quired, the message "Network connection detect-
ed. Acquiring IP address …" is displayed on the
Connection screen. Figure 2-3 shows the message
displayed when the network is ready and the IP is
being acquired.
<Figure 2-1: OSD Connect Screen>
<Figure 2-2: Network Not Ready>
<Figure 2-3 Acquiring the IP after Network Con-
nected>
The below is the Connection screen displayed
when network is completely ready.
<Figure 2-4: Network Ready>
Connect Screen
The Connect screen is shown during start-up,
except when the portal has been configured for a
managed start-up or auto-reconnect. The logo dis-
played above the Connect button can be changed
by uploading a replacement image via the admin
interface.
yMenus and functions in CLOUD mode may
be slightly different depending on the firmware
version. You can download the user manual
for each version from the Teradici homepage:
http://www.teradici.com
yTo check the firmware version, see page <?>.
NOTE