38
ENG
English
Using CLOUD Solution
yPort
For the default setting, leave the port field
empty. When the VMware View Connection
Server uses the SSL authentication, enter 443
in the Port field.
If the server where a user tries to access uses
a port other than a general port, enter the port.
yUse OSD logo for View banner
If this option is enabled, you can change the
OSD logo of PCoIP during the login.
yEnable Peer Loss Overlay
If this option is selected, the "Network Con-
nection Lost" message is displayed on the
screen when it is confirmed that the network is
disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
<Figure 2-21: Advanced Setting for View Connec-
tion Server + Kiosk>
<Figure 2-22: View Connection Server + Imprivata
OneSign Connection Setting>
yThe OSD logo can be uploaded using the
Webpage Administration Interface.
NOTE
yBootstrap URL
Enter the IP address or FQDN information of
the server which performs the OneSign au-
thentication.
yThis setting is provided only for the client.
NOTE
yEnable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when
the user is logged in.
yDisconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
yView Connection Server + Imprivata OneSign
Connection
Select View Connection Server + Imprivata
Onesign Connection to use the Imprivata One-
sign Connection for the client authentication.