47
ENG
English
Using CLOUD Solution
<Figure 2-39: Display Topology>
<Figure 2-40: Touch Screen>
yIt is applicable when the VMware View Con-
nection Server version is 4.5 or later.
NOTE
yDisplay Topology Tab
The Display Topology tab allows the user to specify
the position and alignment of a connected second-
ary monitor.
yTouch Screen Tab
The Touch Screen tab allows the user to specify
the touch sensitivity and alignment when the moni-
tor supports the touch screen function.
yEnable Configuration
When this option is selected, you can set the
display position and alignment.
You can save the settings by clicking the Apply
or OK button, and the settings will be reset if
you initialize the monitor set.
yDisplay Layout
This option allows the user to specify the
direction of monitor connection: vertical or
horizontal.
yAlignment
This option allows the user to specify the align-
ment position of the monitor to be connected
when there is a resolution difference between
the two monitors.
yPrimary
This option allows the user to change the
primary/secondary settings of the connected
monitor.
yEnable right click on hold
If this option is selected, clicking and holding
the touch screen for several seconds works
the same as the mouse right click.
yRight Click Delay
This option allows the user to make moving
the pointer position work the same as the
mouse right click. You can also specify the
distance to move (from Long to Short).
yTouch screen calibration
The alignment of a touch screen is started
when clicking the Start button.