13
ENG
English
USING THE MONITOR SET
yConnect the input signal
cable and tighten in the
direction of the arrow. To
prevent disconnection
secure the cable tightly.
yDo not press on the screen for a prolonged
time. This may cause image distortion.
yDo not display a still image on the screen
for a prolonged time. This may cause image
retention. If possible, use the screen saver.
CAUTION
yA converter can be used to convert the DVI-I
output signal to D-SUB input signal.
yWhen connecting the power cord to the out-
let, use a grounded (3-hole) multi-socket or a
grounded wall outlet.
yThe monitor may flicker when turned on in an
area of low temperature. This is normal.
ySometimes red, green or blue spots may ap-
pear on the screen. This is normal.
NOTE

DVI connection

Transfers digital video signals from the Cloud Mon-
itor to an extended monitor.
Connect the Cloud Monitor to an extended monitor
using a DVI cable.
Connecting LAN/Peripherals

LAN connection

Connect the router or switch to the monitor using a
LAN cable as illustrated below.
yThe LAN cable is sold separately.
yThe following LAN cable type can be used:
Standard: IEEE 802.3 ETHERNET
yIf a device is connected into the earphone
out port via a LAN cable, you can adjust the
volume with the volume icon on PC taskbar.
yConnect the LAN cable and the peripheral
devices prior to booting up the PC.
NOTE
LAN
Hub/Router
DVI-I(D) IN
MONITOR