LG Electronics 23CAV42K

ENG

English

Using CLOUD Solution

yEnable DHCP

If the Enable DHCP option is selected, a device

will be connected to the DHCP server. that al-

locates the IP address, subnet mask, gateway IP

address, and DNS server. If this option is disabled,

the above parameters must be configured manu-

ally.

yIP Address

The IP Address field contains the IP address of the

device. If DHCP is disabled, this field is required.

If DHCP is enabled, this field cannot be edited.

This field must contain the correct IP address. If an

incorrect IP address is provided, an OSD message

is displayed prompting the administrator to provide

the correct the IP address.

ySubnet Mask

The Subnet Mask field contains the subnet mask

of the device. If DHCP is disabled, this field is

required. If DHCP is enabled, this field cannot be

edited. This field must have the correct subnet

mask. If an incorrect subnet mask is provided, an

OSD message is displayed prompting the adminis-

trator to provide the correct the subnet mask.

yEthernet Mode

The Ethernet Mode field specifies the portal's Eth-

ernet mode.

The available options are as follows.

yAuto

y100 Mbps Full-Duplex

y10 Mbps Full-Duplex

If another network device (for example, a switch) is

configured to operate under 10 Mbps Full-Duplex,

100Mbps Full-Duplex or 1GbpsFull-Duplex, the

administrator should always set the Ethernet Mode

field to Auto; and if the device is to operate under

only one speed out of multiple settings, select ei-

ther 10 Mbps Full-Duplex or 100 Mbps Full-Duplex.

Network Tab

The Network tab allows the administrator to config-

ure the portal network parameters.

yThe Network parameters can also be con-

figured using the Webpage Administration

Interface.

NOTE

yIn order to utilize the FQDN feature, a DNS

server, configured properly with DHCP option

81, must be used.

NOTE

yGateway

The Gateway field contains the gateway IP ad-

dress of the device. If DHCP is disabled, this field

is required. If DHCP is enabled, this field cannot

be edited.

yPrimary DNS Server

The Primary DNS Server field contains the primary

DNS IP address of the device. This field is option-

al. If DHCP is enabled, this field cannot be edited.

ySecondary DNS Server

The Secondary DNS Server field contains the

secondary DNS IP address of the device. This field

is optional. If DHCP is enabled, this field cannot be

edited.

yDomain Name

The Domain Name field contains the domain name

used, e.g. "domain local". This field is optional. It

specifies on which domain the host or portal oper-

ates.

yFQDN

The FQDN field represents the Fully Qualified Do-

main Name of the host or portal. The default value

is PCoIP-host-MAC or PCoIP-portal-MAC, where

MAC is the MAC address of the host or portal. If

there is a domain name, it will be added to the

FQDN in the format of PCoIP-host-MAC.domain.

local.