42
ENG
English
Using CLOUD Solution
<Figure 2-29: Reset>
<Figure 2-30: Event Log>
Reset Tab
The Reset tab allows the administrator to reset all
configurable parameters stored in Flash.
Diagnostics Window
In the Diagnostics window, the administrator can
access the window tab to diagnose the portal. The
Diagnostics window has the following tabs:
yEvent Log
ySession Statistics
yPCoIP Processor
yPing
Each tab has the Close button to close the window.
yThe Reset function can also be accessed
through the Webpage Administration Inter-
face.
NOTE
yThe event log (regardless of the quantity) can
also be reset using the Webpage Administra-
tion Interface.
NOTE
yReset Parameters
The Reset Parameters [Reset] buttons resets
all settings and configurations to the factory
default settings. When this button is pressed,
an OSD message is displayed. This is to
prompt the administrator and prevent acciden-
tal reset.
yEvent Log Tab
The Event Log tab allows the administrator to view
and delete the event log messages from the portal.
yView Event Log Message
The View Event Log Message field displays the log
messages accompanied by the timestamp infor-
mation. The following two buttons are available:
yRefresh
The Refresh button refreshes the displayed
event log messages.
yClear
The Clear button clears all event log mes-
sages.