30
ENG
English
Using CLOUD Solution
<IPv6> Tab
The IPv6 tab is used when the portal is connected
to the network configured with the IP v6.
<Figure 2-8: IPv6 Configuration>
yEnable IPv6
If you select Enable IPv6, the portal in use can be
connected to the network configured with the IPv6.
yLink Local Address
The Link Local Address field is automatically filled
with the IP address of a device.
yGateway
The Gateway field contains the gateway IP ad-
dress of the device. Enter the gateway address to
be used by a device.
yEnable DHCPv6
To assign the Dynamic Host Configuration Protocol
version 6 (DHCPv6) of a device select the Enable
DHCPv6 field.
yDHCPv6 Addresses
When DHCPv6 is enabled and the device restarts,
the server enters the device addresses automati-
cally.
yPrimary DNS Server
The Primary DNS Server field contains the pri-
mary DNS IP address of the device. This field is
optional. If DHCPv6 is enabled, this field cannot be
edited.
ySecondary DNS Server
The Secondary DNS Server field contains the sec-
ondary DNS IP address of the device. This field is
optional. If DHCPv6 is enabled, this field cannot be
edited.
yDomain Name
The Domain Name field contains the domain name
used, e.g. "domain local". This field is optional. It
specifies on which domain the host or portal oper-
ates.
yFQDN
The FQDN field represents the Fully Qualified Do-
main Name of the host or portal. The default value
is PCoIP-host-MAC or PCoIP-portal-MAC, where
MAC is the MAC address of the host or portal. If
there is a domain name, it will be added to the
FQDN in the format of PCoIP-host-MAC.domain.
local.
yEnable SLAAC
Select the Enable SLAAC field to use the stateless
auto-configuration of the device.
yEnable Manual Address
Select the Enable Manual Address field to enter
the device address manually.
yManual Address
In the Manual Address field, enter the IP address
manually.