7
ENG
English
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift the monitor and place it on the table in an
upright position.
Install at least 10 cm away from the wall to
ensure sufficient ventilation.
2 Connect the adaptor to the monitor, then plug
the power cord into the wall outlet.
3 Press the (Power) button on the front of the
monitor to turn on the monitor.
yUnplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.
CAUTION
yOnce the pin is removed, it is not necessary
to re-insert it to adjust the height.
Adjusting the stand height
1 Place the monitor mounted on the stand base
in an upright position.
2 Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
3 The height can be adjusted up to 130.0 mm.
yDo not put your fingers or
hand between the screen
and the base (chassis) when
adjusting the screen's height.
Tape
Locking Pin
Stand Body
CAUTION

WARNING

10 cm
10 cm
10 cm
10 cm
130.0 mm