![](/images/new-backgrounds/1247748/24774859x1.webp)
Recording (VCR)/Other functions (VCR)
To set daily/weekly timer
Weekly (e.g.
When you press SET – repeatedly, the DATE indicator will change as follows, in this case the day is Friday.
The current day (Friday)
3 To cancel Timer program:
Press SET + or – to select the unwanted program, then press CANCEL to cancel the program.
4 Press VCR MENU repeatedly until the menu screen is cleared.
Notes:
• If there are other timer record programs remaining, TIMER REC must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer recording operation.
• You can correct or cancel a programmed setting in program confirm mode.
One month later minus one day
| |
(Weekly Wednesday) |
|
| DATE START END CH |
|
If the programs overlap another
Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.
If you set up many timer recording programs at the same start time, the priority will be the top program in the timer recording list.
8 : 00 9 : 00 10 : 00 11 : 00
Program 1
Program 2 |
| Deleted Parts |
| |
Program 3 |
|
| ||
| Non Recorded Portion Parts |
| ||
Recording | Prog.1 | Prog.3 | ||
Prog.2 | ||||
Control Settings |
|
|
|
Notes:
• The daily/weekly recording can be made continuously until the recording is canceled or the tape reaches the end.
• During timer recording the automatic rewinding mechanism does not function.
To confirm or cancel a program
1 If the Timer has been activated, press TIMER REC to deactivate the Timer.
•The timer symbol ( ) will disappear. Then press VCR DVD selector to change to VCR mode.
2 To confirm Timer program:
At step 1 on page 29 select “TIMER REC SET” and press ENTER.
• The timer program list will appear on the screen.
30
2K60121A.indb 30
Stereo recording and playback
Stereo recording and playback
The VHS
When a MTS STEREO broadcast is received, “STEREO” will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo.
The
Note:
When using a Cable TV system, stereo TV programs may be transmitted over a mono cable channel. In this case “STEREO” will not appear and the sound will be in mono.
Output selection
When viewing an MTS stereo TV program, or playing a prerecorded VHS
OUTPUT | SOUND HEARD ON BOTH |
SELECTION | SPEAKERS |
STEREO | STEREO |
L ch | LEFT CHANNEL AUDIO |
R ch | RIGHT CHANNEL AUDIO |
MONO | MONO |
1/12/2007 3:50:13 PM