![](/images/new-backgrounds/1247748/24774853x1.webp)
Clock/counter display
Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display window.
COUNTERCLOCK
Good Picture
Snowy Picture
Notes:
• DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
Convenient function
Repeat playback
The entire video tape will play until its end.The tape will automatically rewind to the beginning and the playback will be repeated.
1 Press VCR MENU.
2 Press ENTER to select “ON” or “OFF”.
•If “ON” is selected, the playback will be repeated endlessly.
3
•To confirm whether AUTO REPEAT function is turning ON or OFF, press CALL. If “” is displayed, it is turning ON 11 .
4
To cancel repeat mode:
Follow the above step 1, then press ENTER to select “OFF” position. Press VCR MENU to return to the TV screen.
Zero return function
This function rewinds the tape to the “00:00” counter position automatically.
1 Press CLOCK/COUNTER.
•The counter display shows the tape running time during playback or recording.
2 Press COUNTER RESET at the desired tape position.
•The counter display will be reset to “00:00” position (e.g. the beginning of recording).
3 Press STOP when playback or recording is completed. Press ZERO RETURN.
•The tape will automatically rewind or fast forward to the “00:00” counter position.
Press VCR DVD selector. The DVD mode and the VCR mode alternate with each other in the display.
DVD mode | VCR mode |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Playback |
Notes: |
|
| |||||
• If you rewind the tape beyond “00:00”, a minus sign |
| ||||||
be displayed in front of the time. |
|
| (VCR) | ||||
• When you load a tape, the counter will reset to “00:00”. | |||||||
• The counter does not function on | |||||||
sections of the tape. When you rewind, fast forward or play |
| ||||||
tapes through blank sections, the counter stops. |
|
Video index search system
This function enables you to locate the beginning of any recording made on the VCR.
Recording an INDEX mark
The Index Search function automatically records an INDEX mark on the tape whenever a recording is initiated.
Index search
Press INDEX + or – during stop or play mode.
For Succeeding programs: Press INDEX +.
For Preceding programs: Press INDEX
(As many as 9 index points can be accessed via this method.)
When the INDEX + or – is |
|
pressed, the unit starts searching |
|
the selected INDEX NO. and finds |
|
the portion. Then playback starts |
|
automatically. To stop the Index | or is displayed |
Search, press STOP. | |
| INDEX NO. (up to 9) |
Notes:
• When you record an INDEX mark at the very beginning of the tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play at a slightly different location.
• INDEX may not function properly with old or worn out video tapes.
• INDEX marks may not be found if it is extremely close to the point where the search began.
• During recording, if you stop recording temporarily, the INDEX mark is not recorded on the tape.
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
However, the picture will not have the high resolution of
Note: You cannot record
27
2K60121A.indb 27
1/12/2007 3:50:11 PM