Sony STR-DE805G manual Using the Sleep Timer, Basic Operations, To stop recording, Notes

To monitor the recorded sound when recording to a 3- head cassette deck

1Click EXIT.

2Click FUNCTION in the main menu.

3Click TAPE.

To stop recording

Click on p of the recording unit.

Basic Operations

Using the Sleep Timer

You can set the receiver to turn off automatically at a time you specify.

1Click FUNCTION in the main menu.

To return to the main menu.

Click EXIT.

Notes

•There is no sound output from the recording component even though all the buttons on the recording unit’s control panel are operational.

•If you click RECORDER during recording, the source being recorded will be cut off.

•If you leave the REC EDIT menu by clicking FUNCTION, SOUND, or EXIT, recording continues, but control returns to the PLAYER side, even if you previously clicked

RECORDER.

•If you open the FUNCTION SELECT menu and click another program source while recording, the newly selected program source will be recorded.

•Some cassette decks require that you press the r REC and ( buttons simultaneously to start recording. To perform one-button from the on-screen display, be sure to record the recording signal as shown in steps 1 to 7 of “Registering non-Sony audio/video equipment” (pages 19 to 22) for both Sony and non-Sony products.

•Sound input through the TAPE connectors on the rear panel cannot be recorded on a recording unit.

•When you record on a DAT or MD connected to the DAT/ MD REC OUT jacks, sound adjustments do not effect the recording.

2Click SLEEP.

FUNCTION SELECT
VIDEO	1	DAT/MD
VIDEO	2	CD
VIDEO	3	TUNER
L D		PHONO
TV / DBS		TAPE
MACRO	1	MACRO	2
		SLEEP
			EXIT

3Click TIMER repeatedly to select the length of the sleep timer. The timer changes as shown below:

SLEEP TIMER SETTING
HOUR		MIN		SEC
2	:	00	:	00
SLEEP			–	+
RETURN				EXIT
n2:00:00 n1:30:00n1:00:00 n0:30:00 nOFF

You can also freely specify the time

Click + or – to change the sleep time in 1 minute intervals. You can specify up to 5 hours.

To return to the main menu

Click EXIT.

To go to the previous menu

Click RETURN.

When the sleep timer is set

“SLEEP” appears in the upper left corner of the main menu.

SLEEP	FUNCTION
	ALL
	OFF

You can check the time remaining before the receiver turns off

Click FUNCTION, then click SLEEP. The remaining	29
time appears in the on-screen display.
	EN