![](/images/new-backgrounds/1247748/24774849x1.webp)
Basic setup (VCR)/ Playback (VCR)
To ADD/DELETE channels
1 Press VCR MENU. Press SET + or – to select “CH SETUP”, then press ENTER.
2 Press SET + or – to select the “ADD/DELETE” and press ENTER.
3 To Add or Delete channels
1)Press Direct channel selection buttons
2)To add channels
Press ENTER until “ADD” appears on the screen.
To delete channels
Press ENTER until “DELETE” appears on the screen. The channel number will blink.
3)Repeat step 1 and 2 to add or delete other channel. 4 Press VCR MENU until the menu screen is cleared.
Noise elimination
When you don’t want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACKGROUND to “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”.
1 Press VCR MENU. Press SET + or – to select “SYSTEM SETUP”, then press ENTER.
2 Press SET + or – to select “NO NOISE BACKGROUND”.
3 Press ENTER to select “ON” or “OFF” position.
4 Press VCR MENU repeatedly until the menu screen is cleared.
Loading and unloading a cassette tape
Use only video cassette tapes marked .
Loading
Push the center of the tape until it is automatically inserted.
Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape, the unit power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
1 Press EJECT on the front panel or on the remote control.
2 Remove the cassette tape.
Automatic tape eject
This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
Basic setup (VCR)
Playback (VCR)
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
To record again
Cover the hole with a piece of adhesive tape.
Screwdriver
Erase prevention tab
Adhesive tape
Tape speed and maximum recording time
Video cassette tape |
| Tape speed |
|
|
| ||
| SP (Standard Play) | SLP (Super Long Play) | |
| 8 hours | ||
| 2 hours | 6 hours | |
| |||
| 1 hour | 3 hours | |
| 30 minutes |
25
2K60121A.indb 25
1/12/2007 3:50:10 PM