![](/images/new-backgrounds/1247748/24774861x1.webp)
Second Audio Program (SAP)
Second Audio Program (SAP)
Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.
This function applies only when the program is broadcast in
1 Press“SAP”.VCR MENU. Then press SET + or – to select
2 Press ENTER to select “ON”.
•Then press VCR MENU until the menu screen is cleared.
Listening to SAP
When the VCR is turned on or a channel selection is made, make certain the letters “SAP” appears on the screen
for about 4 seconds. This means that the “Second Audio Program” broadcasting is available.
Notes:
• When playing back a tape that is not recorded in
• When listening to a VHS
Connection with second VCR
Playback VCR
|
| LINE IN 2 | ||
|
| To VIDEO |
| |
To VIDEO OUT |
| IN |
| |
| To AUDIO (L) IN | To AUDIO | ||
To AUDIO (L) OUT |
|
| ||
|
| (R) IN | ||
To AUDIO (R) OUT |
|
| ||
AUDIO/VIDEO cable (not supplied) | ||||
| ||||
Connection with Camcorder |
|
| ||
Playback Camcorder |
|
| LINE IN 2 | |
|
|
| ||
To AV Jack | To VIDEO |
| ||
|
| IN |
| |
|
| To AUDIO (L) IN To AUDIO | ||
|
|
| (R) IN | |
| AUDIO/VIDEO cable (not supplied) |
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
Recording a DVD/CD disc
You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR.
Other functions (VCR)
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
Duplicating a video tape
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)
• Load a cassette tape with the erase prevention tab intact.
• Load a previously recorded tape into the playback VCR or Camcorder.
1 Press SP/SLP to select the desired tape speed SP or SLP.
•It is recommended to set the tape speed to the SP mode on the recording VCR for best results.
2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.
• “L1” or “L2” will appear on the display.
L1: on the rear panel L2: on the front panel
3 Press PLAY on the playback VCR or Camcorder.
4 Press REC/OTR on the recording VCR.
• The duplicating process begins.
5 Press STOP when you finish duplicating.
Duplicating a DVD or CD disc
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)
• Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.
1 Press SP/SLP to select the desired tape speed SP or SLP.
2 Press VCR DVD selector to select the DVD mode.
• The DVD mode indicator will light.
3 Press PLAY to start playback.
4 Press REC/OTR to start recording.
•The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape.
5 Press STOP when you finish recording.
•If you wish to stop a DVD/CD disc, press VCR DVD selector to change the DVD mode, then press STOP.
Notes: |
|
• You may not be able to record the beginning of the disc. |
|
Begin VCR recording once program playback commences | |
on the DVD. |
|
• When the scanning mode is set to the progressive mode, |
|
you cannot duplicate a disc material onto a video tape. |
|
When REC/OTR is pressed, the PROGRESSIVE indicator | |
“ ” on the display window will flash. |
|
• You cannot record discs encoded with copy guard |
|
function. The following icon and text will show up on the |
|
TV screen. | 31 |
DISC IS COPY PROTECTED |
2K60121A.indb 31
1/12/2007 3:50:13 PM