Heath Zenith 3196425 manual Troubleshooting, Chime does not sound, Code Setting

Page 6

Troubleshooting

A.Low Battery Indicator: When the push button designated for the “Ding-Dong” tone is pressed, only a “Dong” note will play when battery power is low in chime unit.

B.Chime does not sound:

Make sure push button and chime codes are the same (see Figure 9).

Check orientation of push button and chime batteries (See diagram inside push button and chime for correct battery orientation.)

Check charge of push button and chime batteries, replace if necessary.

C.Chime sounds when not intended (false triggers): Chime is receiving interference from another wireless device; change the code setting (see Code Setting below).

D.Batteries seem OK, but the chime does not work when installed:

Do not mount chime or push button on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime or push button off metal surface.

Concrete floors may reduce range. Move chime away from floor.

Try locating chime closer to push button.

E.Code Setting:

It is recommended to only change one code position at a time and then check to see if system is functioning properly.

1.Open the cases and locate the jumpers on the push button and the switches on the chime (see Figure 9).

2.The push button has eight different jumper locations and the chime has seven switches. Jumper positions 1 through 7 on the push button and the switches on the chime are used for setting the code.

3.To change the code, either:

Add a jumper to the push button and set the matching chime switch to “ON” or...

Remove a jumper on the push button and set the matching chime switch to “OFF” or...

Move a jumper in the push button from one location to another.Turn “OFF” the chime switch matching the first location and turn “ON” the chime switch matching the new location of the jumper.

Note: Code positions 1 through 7 must be exactly the same for both the push button and chime for this system to function.

Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the push button and switch locations 5, 6, and 7 in the “ON” position on the chime (see Figure 9).

The range of the wireless chime can vary with location, temperature, and battery condition.

- -

598-1149-01

Image 6
Contents Wireless Mechanical Battery Operated Chime Make sure the surface of the door jamb or wall is Basic Chime Chime with Separate Decorative CoverChime with Attached Decorative Cover Tune Settings Inside Push ButtonTroubleshooting Code SettingChime does not sound Inside Push Button and Chime Technical Service No Service Parts Available for this ProductRegulatory Information ONE Year Limited Warranty Campana mecánica inalámbrica que funciona con pila Modelo 3196425 AC-6505Campana Campana con tapa Básica Decorativa separada Campana básica Campana con tapa decorativa separadaCampana con tapa decorativa FijaProgramación del tono Figura 8 Dentro del PulsadorConfiguración de códigos Análisis de AveríasLa campana no suena Figura 9 Dentro del pulsador y de la campana Servicio Técnico Información RegulatoriaNo hay piezas de servicio disponibles para este producto Garantía Limitada a 1 AÑO Carillon mécanique sans fil, commandé par piles Carillon Carillon avec couvercle De base Décoratif amovible Carillon de base Carillon avec couvercle décoratif amovibleCarillon avec couvercle décoratif Réglage de la mélodie Le carillon ne sonne pas Réglage des codesPour ôter et replacer les cavaliers Service Technique Aucune pièce de rechange n’est disponible pour ce produitGarantie Limitée DE 1 AN 598-1149-01

3196425 specifications

Heath Zenith 3196425 is an innovative and highly efficient doorbell system that exemplifies modern technology in home security and convenience. Designed with user-friendliness and practicality in mind, this model has garnered attention for its impressive features and reliability.

One of the standout characteristics of the Heath Zenith 3196425 is its wireless operation, which eliminates the need for complex wiring setups. This feature allows homeowners to easily install the doorbell in locations that may be inconvenient for traditional wired models. The wireless design not only simplifies installation but also enhances flexibility, enabling users to position the doorbell button where it is most accessible.

The unit boasts a range of sound options, including multiple chimes and melodies, allowing homeowners to customize the alert tone according to their preference. This personalization creates a more pleasant and engaging experience, as users can select sounds that resonate with their aesthetic and personal taste.

Durability is another key feature of the Heath Zenith 3196425. The device is constructed with weather-resistant materials, ensuring it can withstand the elements without compromising performance. This resilience makes it an ideal choice for outdoor placements, as its longevity is assured even in varying weather conditions.

Moreover, the Heath Zenith 3196425 incorporates advanced technology, such as a long-range signal, which ensures reliable communication between the doorbell and the receiver. This ensures that the doorbell will effectively notify homeowners of visitors, even from a significant distance.

The system also includes adjustable volume settings, allowing users to tailor the sound level to their liking and environment. This feature is particularly useful in large homes where a standard volume may not suffice.

Lastly, the Heath Zenith 3196425 includes a sleek and modern design that fits seamlessly into various home aesthetics. Its simplistic yet elegant appearance makes it an unobtrusive addition to any entryway.

In summary, the Heath Zenith 3196425 is a versatile and durable wireless doorbell system that offers customizable sound options, weather resistance, long-range operation, adjustable volume, and an attractive design. Its combination of practicality and style makes it an essential component for enhancing home security and visitor communication.