BEA 80.0240.04 manual Lo-Linx

MTR STALL

SEE NOTE #1	LO-LINX MOTOR HARNESS
	p/n: 70.5076

+ RED

MOTOR - RED

SEE NOTE #2

LO-LINX

Patent Pending

SENSORS AUX

BEAM SWITCH

TX RX

BLACK	BLACK	24 V			RED
RED	BLACK	TRANSFORMER			RED
TO CTRL PWR SETUP
		RED	ON
				Pre-wired
		BLACK	OFF	switch
LO-LINX POWER HARNESS p/n: 70.5095		WHITE		assembly
			HOLD OPEN
LO-LINX HOLD SWITCH HARNESS p/n: 70.5078
LO-LINX CONTROL HARNESS p/n: 70.5097

EAGLE 1 BODYGUARD 1

LO-LINX BODYGUARD HARNESS p/n: 70.5082

LO-LINX EAGLE HARNESS p/n: 70.5096

SEE NOTE #3 & 4

N/O PUSH

COM TO OPEN

	SEE NOTE #5
BODYGUARD 2		EAGLE 2

LO-LINX BODYGUARD DUAL-EGRESS HARNESS p/n: 20.5083

BESAM 300/400

(ETIK) CONTROL

YELLOW

WHITE

GREEN

BLUE

BROWN

LO-LINX SUPERSCAN HARNESS p/n: 70.5071

LO-LINX SUPERSCAN HARNESS p/n: 70.5071

APPROACH SIDE SUPERSCAN

NOT USED W/LO-LINX LITE

INDIVIDUALLY CAP OF UNUSED

WIRES AS THEY ARE HOT!

SAFETY SIDE SUPERSCAN

APPROACH SIDE SUPERSCAN

NOT USED W/LO-LINX LITE

INDIVIDUALLY CAP OF UNUSED

WIRES AS THEY ARE HOT!

SAFETY SIDE SUPERSCAN

100 ENTERPRISE DRIVE PITTSBURGH, PA 15275 PHONE: (412) 249-4100 FAX: (412) 249-4101

NOTES:

1.LO-LINX MOTOR HARNESS CONNECTION IS TIED IN PARALLEL TO EXISTING MOTOR LEADS OF 1 MOTOR ONLY. NO RESPECT TO POLARITY IS REQUIRED.

2.EXTERNAL SWITCHES (OR "B" SWITCHES) ARE REQUIRED IF INHIBIT DESIRED AT SWING SIDE SUPERSCANS, SWITCH OPENS UPON INHIBIT POINT.

3.THE KNOWING ACT SWITCH IS CONNECTED AT THE AUX INPUT AND CAN BE ANY DRY CONTACT DEVICE SUCH AS A PUSHPLATE, CARD READER, ETC. THE AUX INPUT IS REQUIRED FOR ALL INITIAL ACTIVATION WHEN FUNCTION FA ON THE LO-LINX IS SET TO '01'.

4.SET LO-LINX FUNCTION "FS" TO 01.

5.THE SECOND BODYGUARD AND EAGLE ARE PRIMARILY USED IN DUAL-EGRESS APPLICATIONS. IF A SECOND BODYGUARD IS REQUIRED, USE A "Y" HARNESS (20.5083).

IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC. FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME @ 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 /

WEST COAST:1-888-419-2564. DO NOT LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM

EMAIL: www.beasensors.com

TITLE: BESAM SWINGMASTER 300/400

ETIK CONTROL W/LO-LINX-LITE

SIZE:	DRAWN BY:	REV BY:	PART NO:	80.0274.01
B	JED	TUC
	SCALE:	DATE:	SHEET
	NONE	05/17/2007	1 OF 1