Aiphone C-123LW installation manual Installation Tips, Troubleshooting Guide

Page 4

INSTALLATION TIPS:

1.Use shielded wire for the communication path, and ground one end of the shield to an earth ground.

2.Run intercom wire at least 20" away from AC wiring, fluorescent lights or dimmer switches.

3.Keep intercom cable away from alarm, data, phone, video cables, and any other potential source of interference.

4.Door release wires must be in a separately jacketed cable from the intercom wires. Use two separate cables; one for audio and one for door release.

5.When installing a second master station, wire must be run from the first master station, not from the door station. See diagram on page 2.

6.Do not install the master station near light switches, dimmer switches, or other devices that may cause interference with the intercom system.

7.Do not install the master station on the opposite wall from the door station. If the units are too close, acoustical feedback may result.

TROUBLESHOOTING GUIDE:

#

PROBLEM

POSSIBLECAUSE

SOLUTION

 

 

 

When door calls in, it shorts the # 1 terminal to the Eterminal. If the

 

 

 

DAK-2Sis installed backwards the chime fromthe door call-in will not

 

 

 

be heard. Install the DAK-2Scomponent module with the bare wire

 

No call in from door to master, but communication

 

end under the 1 terminal, and the door station 1 wire tied to the

1

works fine.

Reversed DAK-2Scomponent module.

colored wire end of the DAK-2S.

 

When the talk button is pressed, the other master

Missing or reversed DAK-2Scomponent

Install the DAK-2Scomponent module as described above and

2

rings.

module.

shown on dual master instructions.

 

 

 

If both C-ML/A's share the same power supply, a ground loop

 

When the talk button is pressed, feedback is heard

 

feedback will occur when the talk button is pushed. Install separate

3

at both masters.

Common power supply.

SKK-620's for each master, or install batteries in each master.

 

 

 

"+ / -" are on left column, "E/ 1" are on right column. If swapped, unit

 

 

 

will appear dead. Verifythat 1 wire from the door station is connected

4

Unit appears dead; no functionality.

Terminals 1 and - crossed.

to 1, and negative of power supply is connected to -.

 

 

 

Take batteries out of the master station. Both power sources cannot

5

Systemsqueals and batteries get hot.

Power supplyand batteries both installed.

be used simultaneously.

 

 

 

If batteries installed, replace them. If power supply, check for 6VDC.

6

Chime tone sounds weak, lower frequency.

Weak batteries or low voltage.

If low, install new SKK-620 power supply.

 

 

 

If the resistance of the wire is too great, usually fromexceeding

 

 

 

distance limitations, the master maynot time out as designed. Refer

7

Master stays on; does not time out.

Incorrect cable being used.

to wire specifications in the instructions.

 

 

 

Remove front cover of C-ML/Aand locate volume potentiometer

 

 

 

through hole at the bottomof the unit. Use a small screwdriver to

8

Voice volume is too loud or too soft.

Volume control not adjusted properly.

adjust the volume, clockwise to increase.

 

 

 

There is not a separate call tone volume adjustment on the C-ML/A,

 

 

 

so the volume level cannot be altered. Surface mount component

9

Chime tone volume is too loud.

Standard volume level.

level modification would be required, which is not practical.

 

 

 

Make sure the negative from the 12VDCsupplyfor the RY-AC is

 

 

 

connected to the negative of the C-ML/Amaster. Make sure the

10

RY-ACexternal signaling relaynot working.

Missing or wrong connection.

WHITEwire of the RY-AC is connected to the DAK-2Scomponent

module to 1 terminal, not negative terminal.

Aiphone Communication Systems

 

 

1700 130th Ave. N.E.

Toll Free Technical Support:

Pg. 4

Bellevue, WA 98005

C-123LW Supp Instr.

(425) 455-0510

(800) 692-0200

#90102

FAX (425) 455-0071

E-mail tech-serv@aiphone.com

0906JS

Image 4
Contents Optional Components & Accessories Master StationInstallation Guidelines Master #1 DoorMaster #2 Operation NotesModification Instructions RY-ACBell Component ModuleInstallation Tips Troubleshooting Guide
Related manuals
Manual 4 pages 11.47 Kb

C-123LW specifications

The Aiphone C-123LW is an innovative intercom system designed for both residential and commercial settings. Known for its reliability and user-friendly features, this intercom enhances communication and security within various environments. Its sleek design and advanced technology make it a popular choice among consumers seeking quality communication solutions.

One of the standout features of the Aiphone C-123LW is its ability to support two-wire communication. This technology enables easy installation, as it requires minimal wiring, making it a cost-effective option for users looking to set up an intercom system without extensive renovations. The two-wire system not only simplifies the installation process but also reduces the overall expenses associated with wiring.

The intercom system is equipped with a high-quality speaker and microphone, ensuring crystal clear audio during conversations. Users can enjoy hands-free communication, which is particularly useful in busy environments, where multitasking is necessary. The built-in volume control allows users to adjust the audio levels to their preferences, ensuring optimal sound quality in different settings.

Another notable characteristic of the Aiphone C-123LW is its robust call functionality. Featuring a door release option, users can remotely control access to their premises, enhancing security. This feature is particularly valuable for residential users who want to manage entry points without having to physically open the door. The intercom also includes visual indicators, letting users know when someone is calling, which adds an extra layer of convenience.

The Aiphone C-123LW intercom system conforms to the latest technology standards, ensuring compatibility with other devices and systems. It can be integrated with video systems, allowing users to not only communicate audibly but also see who is at the door. This multimedia functionality greatly enhances security and control, catering to modern consumer needs.

Durability is another advantage of the Aiphone C-123LW. Constructed with high-quality materials, it is designed to withstand the daily wear and tear of use in various environments. Its aesthetic design fits seamlessly into any décor, whether it's a home or an office setting.

In summary, the Aiphone C-123LW intercom system stands out for its reliable two-wire communication, superior audio quality, and integrated security features. Its adaptability to different environments and user-friendly functionality make it a top contender among intercom options, ensuring effective communication while enhancing security for all users.