LG Electronics LSU090HE, LSN090CE How To Mount Installation Plate, Drill a Hole In The Wall

How To Mount Installation Plate

The wall you select should be strong and solid enough to prevent vibration

1.Mount the installation plate on the wall with

type "A" screws. If mounting the unit on a concrete wall, use anchor bolts.

•Mount the installation plate horizontally by aligning the centerline using a level.

Installation Plate

Chassis

Hook

Type “A”

2.Measure the wall and mark the centerline. It is also important to use caution concerning the location of the instal- lation plate-routing of the wiring to power outlets is through the walls typically. Drilling the hole through the wall for piping connections must be done safely.

CHASSIS		Distance (mm)
(Grade)
	A	B	C	D
S4	50	105	59	105
SE	65	110	85	110
S5	95	122	235	122

D	Installation plate	B
Ø70mm C		A Ø70mm
Left rear piping		Right rear piping

DrillaHoleIn The Wall

•Drill the piping hole with a ø 70mm(2.76in) hole core drill. Drill the piping hole at either the right or the left with the hole slightly slanted to the out- door side.

Indoor

WALL

Outdoor

5-7mm (0.2~0.3")

Service Manual 19