LG Electronics LW7000ER owner manual Installation Kits Contents, Preparation of Chassis

WK, WL Series

InstallationKits Contents

1	2	3	4
5	6	7	8	13

10

12

9

11

NO.	NAME OF PARTS	Q'TY
1	FRAME CURTAIN	2
2	SILL SUPPORT	2
3	BOLT	2
4	NUT	2
5	SCREW (TYPE A)	16
6	SCREW (TYPE B)	3
7	SCREW (TYPE C)	5
8	FOAM-STRIP	1
9	DRAIN PIPE	1
10	FOAM-PE	1
11	FRAME GUIDE	2
12	WINDOW LOCKING BRACKET	1
13	FOAM-PE	1

ENGLISH

Suggested Tool Requirements

SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL

PREPARATION OF CHASSIS	Shipping
	Screws

1 Remove the screws which fasten the cabinet at both sides and at the back.

2Slide the unit from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet.

3Cut the window sash seal to the proper length.

Peel off the backing and attach the Foam-PE to the underside of the window sash.

4Remove the backing from the top upper guide Foam-PE

and attach it to the bottom of the Upper Guide.

5Attach the upper guide onto the top of the cabinet with 3 Type A screws .

6Insert the Frame Guides into the bottom of the cabinet.

7Insert the Frame Curtain into the Upper Guide and Frame Guides .

8Fasten the curtains to the unit with 4 Type A screws .

Upper guide

13
	10
(Type A)
5	Upper guide
5	11

11

5 (Type A)

17